之前使用IPC227D安装WinAC RTX F 2010 SP1,step7程序运行正常。
现更换为IPC227E安装WinAC RTX F 2010 inclu SP3, 点RUN后WinLC RTX F一直处于stop状态,INTF亮红灯指示。记录事件日志如下:
Event 1 of 70: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
- STOP request exists
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered by switch setting; last power on backed up
Permissibility of certain startup types:
- Manual warm restart permitted
- Automatic warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- Warm restart triggered by switch setting; last power on backed up
Operating mode: STOP (internal)
Incoming event
11:51:18:973 am 04/29/20
Event 2 of 70: Event ID 16# 457F
STOP caused by STOP command
Breakpoint in user program: Cyclic program (OB1)
Priority class: 1
FB number: 1001
Module address: 3084
Previous operating mode: RUN
Requested operating mode: STOP (internal)
Internal error, Incoming event
11:51:18:973 am 04/29/20
Event 3 of 70: Event ID 16# 75EB
Unstable system clock
Internal error information 1: 00000065
Internal error information 2: 0
Previous mode: RUN
Requested mode: STOP
Internal error, Incoming event
11:51:18:973 am 04/29/20