- {{item.name}}
更多
软件
5.0 分
DOS下的可执行文件wipeout.exe
文档编号:2123168|
文档类型:软件|
发布时间:2014年11月19日
- 0
- 1818
- 7057
QUESTION: -
ANSWER:
"wipeout.exe" is a DOS application with which you can reset the target
system (S7-200) to the factory default settings. This program is very useful if
you have a target system with an unknown address or baud rate and cannot
communicate with the target system using the STEP 7 Micro/Win. WIPEOUT deletes
•
The user program (OB1)
•
The data block (DB1) and
•
All configuration information (SDB).
The target system is set with address 2 to 9600 baud. WIPEOUT is not installed
in conjunction with STEP 7-Micro/WIN 32. A copy of this application is on the
Installation CD of STEP 7 Micro/WIN 32.
The program can be copied onto the hard disk and then called from there. To call
the program, open the DOS window and enter the "WIPEOUT" command with the
corresponding path. Then follow the prompts on the screen.
前往全球技术资源库查看完整内容
- 评论
更多
-
分享
扫码分享
- 收藏 收藏
- 点赞 点赞
- 纠错 纠错
关联文档
- 从组态计算机将 WinCC flexible 运行文件传到另一台计算机,需要对 RT Loader 做哪些配置?
- SIMOTICS S: 抱闸过早失灵的可能原因
- 用于 ID 钥匙开关的可编程 IO-Link 电子模块说明
- 如何配置 SIMATIC S7-300 作为主时钟或从时钟用于工业以太网下的 SIMATIC 模式时钟同步?
- 如果 WinCC V14 SP1 Update 1 下的 SIMATIC Visualization Architect 已经安装,那么如何再安装 WinCC (TIA Portal) V14 SP1 Update 3?
- 时间同步 - 自动化环境下的时间同步
- SINAMICS V90:Epos模式下的 "运行至固定停止点" 功能
- SIMATIC S7: 以下的这些事件 ID:从 "16# 08:9000" 到"16# 08:9013"是什么含义?
- 如果FB块被多次调用,如何监控单个块的执行情况?
- 在SFC中,如何实现从一个 Sequencer 跳出后回到另一个 Sequencer 的某个固定位置并继续执行?
看过该文档的用户还看过哪些文档
{{item.nickName}}