- {{item.name}}
SINAMICS G120: Connecting external DC 24V power supply
- 0
- 215
- 3
Sometimes an external DC 24V power supply is needed to keep the control unit powered up when the mains supply of the SINAMICS G120 inverter is switched off. The way to connect external DC 24V varies depending on the frame size of power modules.
How to connect the external DC 24V power supply to SINAMICS G120?
The way to connect external DC 24V varies depending on the frame size of power modules.
1. If the power module is in FSA ~ FSF, the external DC 24V power supply should be connected to T31 and T32 on CU.
2. If the power module is in FSGX, the external DC 24V power supply should be connected to T1 and T2 on X9 terminal block. Avoid connecting the external DC 24V power supply to T31 and T32 on the CU as this may cause nuisance tripping on these Power Modules.
For further Information please see: SINAMICS G120 Power Module PM240; Entry ID: 109738501
3. Information for MICROMASTER please find in FAQ Entry-ID: 8822493
剩余80%未阅读,请登录后下载/查看文档
- 评论
-
分享
扫码分享
- 收藏 收藏
- 点赞 点赞
- 纠错 纠错
- SINAMICS G120 (CU2x0-2x): "可关断”和“非关断”的24V电源在几个控制单元之间如何级联
- SINAMICS V70/V90: 关于24V直流电源的建议
- SINAMICS S120书本型模块24V端子适配器和直流母线适配器的选型与使用
- SINAMICS G120 与S7-300之间的DP通讯
- TIA Portal V12 库,含有用于通过 SIMATIC S7-1200/300/400 控制器对 SINAMICS G120 变频器进行控制的画面
- SINAMICS G120,功率模块 PM240-2
- SINAMICS G:通过 S7-1200 (TIA Portal)、PROFINET/PROFIBUS DP 以及 Safety Integrated 功能 (通过端子) 和人机界面对 G120 (StartDrive) 进行转速控制
- SINAMICS G120 / G120C / G120D / G120P: 用 PROFIBUS 或者PROFINET 循环修改斜坡上升时间和斜坡下降时间。
- SINAMICS G120, CU250S-2::F31116 编码器1 监控信号A+B振幅错误
- SINAMICS G120模块化变频器
{{item.nickName}}