- {{item.name}}
SINAMICS G:压力控制型压缩机
- 0
- 404
- 681
Application description for the scripted commissioning of a SINAMICS G120 for pressure control of a compressor
Task
Compressors and blowers compress the air e.g. the gases up to values significantly above atmospheric pressure. The main applications are
- Generation of compressed air for aeration in wastewater sites , pneumatic controls , pneumatic transport for bulk goods , pneumatic compressed air for industrial manufacturing devices, forming containers of glass or plastic (PET ), breathing air (scuba diving , breathing apparatus for fire protection ) , medical applications.
- Separation of gases such as in air separation plants.
- Compression of the refrigerant in refrigerators after the linden method for freezers in household , commercial refrigeration , refrigerated counters in food retail , industrial refrigeration equipment such as cold stores or refrigerated ships , air conditioning systems for residential, commercial and industrial purposes.
Solution
Increasingly, fixed speed compressors with storage tank are replaced by compressors with variable speed drives, which are able to control the pressure needed in a narrow frame. Energy-intensive over-compression with fixed speed compressors and storage tank is avoided. High starting currents and starting torques with repeated switching on and off are when using the variable speed compressor drives are of the past.
The following description is used to completely set the inverter parameters for the "Pressure controlled compressor" application with up to 4 pumps. It includes a standard connection circuit diagram for the control wiring, a script that can run in the STARTER commissioning software, as well as additional functions, which are used for subsequent parameterization
Screw compressor for compressed air industrial applications

Picture 01
Downloads
for SINAMICS G120/G120P, CU230P-2 from FW V4.4
77491582_pressure_controlled_compressor_V1.1_en.pdf (607,2 KB)
77491582_Pressure_controlled_compressor_V1_2_en.zip (7,6 KB)
Last Changes
09/2013: Script and PDF revised for FW from V4.4
02/2017: Tested with Firmware V4.7 SP6 HF2 and STARTER V4.5.1.0
Additional Keywords
motioncontrol_apc_applications
- 评论
- 收藏 收藏
- 点赞 点赞
- 纠错 纠错
关联文档
- 用S7-200和SINAMICS V80实现点到点位置控制
- SINAMICS S120大功率整流回馈单元SLM 进线断路器的联锁控制
- SINAMICS S120变频器可否在V/F控制方式下实现一拖多
- 为什么SINAMICS S120 无法接收PLC发送的控制字PZD1
- SINAMICS S120 控制单元CU320-2 DP 连接设备兼容性
- SINAMICS S120 整流单元混合并联时的控制时序
- SINAMICS G120的控制单元CU240B/E-2 DP(V4.4)Slave to Slave通讯
- SINAMICS S120 SERVO模式下速度位置控制切换
- SINAMICS S120 SERVO模式下位置控制与速度控制方式的切换
- 变频器 SINAMICS G120,配备控制单元 CU230P-2
看过该文档的用户还看过哪些文档



西门子官方商城




{{item.nickName}}