博图WinCC v13.1升级到V15.1 控件问题

精

奖

官

994 产品版区：STEP 7(TIA 博途)

文档类型：问题类别：产品选型问题类别：产品使用问题类别：故障诊断

博图WinCC升级后，阀门控件点击手动按钮后，该控件无法关闭。点击其它阀门或者切换画面（画面能切换），但第一次点击的阀门画面一直显示。无法关闭，求大神指点迷津。在13.1正常运行，需要检查哪些地方。PLC编译正常

#include "GlobalDefinitions.h"
void OnPressLeft(char* screenName, char* objectName, char* propertyName, UINT flags, int x, int y)
{
char* lpszPictureName = screenName;char* lpszObjectName = objectName;char* lpszPropertyName = propertyName;UINT nFlags = flags;
// WINCC:TAGNAME_SECTION_START
// syntax: #define TagNameInAction "DMTagName"
// next TagID : 1
//#define TAG_0 "bMode"
//#define sTAG_01 "sACT01Name";
// WINCC:TAGNAME_SECTION_END
// WINCC:PICNAME_SECTION_START
// syntax: #define PicNameInAction "PictureName"
// next PicID : 1
// WINCC:PICNAME_SECTION_END
//SetTagBit(TAG_0,1-GetTagBit(TAG_0));
//WriToLog(1,"JLJL","shouzidong"); //Return-Type: void

char *no1;

no1= GetPropChar("ACT02.Pdl","InstanceName","Text"); //Return-Type: char*

if (GetTagWordWait("wWord1")&(1<<8))
{
SetTagWordWait("wWord1",GetTagWordWait("wWord1")&~(1<<8));

  if ((GetTagWordWait("wWord1")&(1<<8))==0)
  {
    LogOperation(no1,5);     //操作记录。参数说明：1 设备编号；2  操作类型
  }
SetOperation(lpszPictureName,"btn_on",0);
SetOperation(lpszPictureName,"btn_off",0);
}
else
{
SetTagWordWait("wWord1",GetTagWordWait("wWord1")|(1<<8));
  if (GetTagWordWait("wWord1")&(1<<8) )
  {
    LogOperation(no1,6);     //操作记录。参数说明：1 设备编号；2  操作类型
  }
SetOperation(lpszPictureName,"btn_on",1);
SetOperation(lpszPictureName,"btn_off",1);
}
}