- {{item.name}}
如何将 V4 到 V7 的 WinCC 项目移植到新版本?
- 0
- 765
- 36
How to migrate WinCC projects to new versions of WinCC from V4 to V8?
The attached PDF document provides detailed instructions for migrating WinCC projects from V4 to V8. Information is also given about the order numbers and licenses required plus everything you need to know about upgrading a WinCC project.
Notes
- Please note that upgraded WinCC projects can no longer be opened with previous versions of WinCC. Make a backup of your project before upgrading.
Detailed information is available in the WinCC Online Help under the keywords "Migration" and "Upgrade". - The function of the PROFIBUS FMS channel is dependent on the version of SIMATIC NET. Up to WinCC V7.2 the channel can be used without any restrictions. With WinCC V7.3 you can use PROFIBUS FMS with the SIMATIC NET version V7.1. With WinCC WinCC V7.4 and higher this version of SIMATIC NET is incompatible, which means that you cannot use PROFIBUS FMS in WinCC.
Prior to use, check the compatibility of the required version of SIMATIC NET up to version V7.1 with your operating system.
Information and the link to the CompaTool are available in Entry ID 64847781. - With WinCC V7.0 SP2 and higher the "Windows DDE" channel is no longer included in the delivery. Use the "OPC" channel instead. Remove the "Windows DDE" channel before migration.
- If the quantity framework of the license used before migration no longer exists, the next largest license comes automatically during migration.
Example:
License before migration: V6.2 RT (256)
License after migration: V7.0 RT (512) - Backup archives from WinCC V6.0 to V6.2 SP1 (SQL Server 2000) cannot be opened with WinCC from V7.4. You have to migrate them via an intermediate step up to WinCC V7.3 (maximum SQL Server 2008).
With SIMATIC WinCC V7.2 onwards you use the tool integrated in the WinCC Explorer: Convert Project Data.
Fig. 1
Up to SIMATIC WinCC V7.0 you use the following tool for migration: WinCC Project Migrator.
Fig. 2
Download
Documentation Migration V4 up to V6.2 (967,9 KB)
Documentation Migration V6.2 up to V8 (773,5 KB)
Product Trainings
- SITRAIN System Course: WinCC V7 / V8 (Entry ID: 109758633)
- SITRAIN Advanced Course: WinCC V7 / V8 and WinCC Options (Entry ID: 109758660)
Additional Keywords
Upgrade, Upgrading, GMP, Pharma, Life Science, Validation, FDA 21 CFR Part 11, 22020734, Guidelines
- 评论
-
分享
扫码分享
- 收藏 收藏
- 点赞 点赞
- 纠错 纠错
- 在 Windows 7 64位操作系统中,如何将 WinCC flexible 2008 SP3 项目移植到 WinCC V11 (TIA Portal) V11 SP2?
- STEP 7 (TIA Portal) V12 将 PLC 项目移植到 S7-1500
- 如何将CAS移植到 Process Historian 2013?
- 将项目从SIMOCODE ES 2007移植到SIMOCODE ES (TIA Portal) 需要注意些什么?
- SIMATIC WinCC V7 SP3 的演示项目
- 如何通过OPC 连接PC站和S7-1500 CPU或固件版本V4以上的S7-1200 CPU。
- SINAMICS V90: 怎样通过新版本固件打开老版本固件的项目文件
- 如何实现WinCC V7和S7-400H PN的工业以太网通信
- WinCC V7 中如何组态面板( Faceplate )
- WinCC V7 中如何生成操作员的操作记录
{{item.nickName}}