不同的调试软件版本支持的固件版本也不一样，而且你的驱动器的固件版本也需要进行升级。
更新的你调试软件以及CU的固件版本。

S120固件升级步骤：https://www.ad.siemens.com.cn/club/bbs/upload/file/20160319/6359399066379899269337861.pdf

STARTER

安装新版的STARTER

STARTER   支持的 

Minimum system requirements

The following minimum requirements must be complied with:

Hardware

Programming device or PC with Pentium III min. 1 GHz (> 1 GHz recommended)

Work memory 2 GB (recommended 4 GB)

Screen resolution 1024 × 768 pixels, 16-bit color depth

Free hard disk memory: > 5 GB

Software

Microsoft Internet Explorer V6.0 or higher

64-bit operating systems:

Microsoft Windows 7 Professional SP1

Microsoft Windows 7 Ultimate SP1

Microsoft Windows 7 Enterprise SP1 (standard installation)

Microsoft Windows 10 Pro, from Version 1709

Microsoft Windows 10 Enterprise, from Version 1709

Microsoft Windows 10 Enterprise 2016 LTSB (OS Build 14393)

Microsoft Windows Server 2016

Notes relating to operating systems:

32-bit Window systems are no longer supported.

Supported virtualization platforms

You can install the SINAMICS MICROMASTER STARTER V5.3 HF3 and SINAMICS DCC V3.3 HF1 software packages on a virtual machine. Use one of the following virtualization platforms:

VMware vSphere Hypervisor ESX(i) 6.7

VMware workstation Pro 14.1.x

VMware Player 14.1.x

Microsoft Server 2016 Hyper-V

You can use the following guest operating systems to install SINAMICS MICROMASTER STARTER V5.3 HF3 and SINAMICS DCC V3.3 HF1 on the selected virtualization platforms:

Windows 7 Professional/Ultimate/Enterprise (64-bit)

Windows 10 Pro, Enterprise (64 bit)

Notes

The same hardware requirements apply to the guest operating system as for SINAMICS MICROMASTER STARTER V5.3 HF3 and SINAMICS DCC V3.3 HF1.

The system operator must ensure that the guest operating systems have sufficient system resources.

The use of manufacturer-certified hardware is recommended for the operation of Hypervisor ESX(i).

The STARTER setup can only be performed for "native" Windows versions with Far Eastern languages when an MUI version of Windows 7 is used. 
The executability in a software configuration other than the one above has not been tested.

Supported languages 

German

English

French

Italian

Spanish

1) Note regarding using STARTER in the SINUMERIK environment:
In a SINUMERIK environment the STARTER commissioning tool can be used for diagnostics and optimization purposes. All work steps performed with the STARTER commissioning tool in a SINUMERIK environment are only designed for use in the online mode. This means there must be an online connection between the STARTER commissioning tool and SINUMERIK in order to use the range of functions offered. 
Once an online connection has been established, the trace, function generator, alarm diagnostics, etc. can be used in the STARTER commissioning tool, for example, for diagnostics and optimization purposes.

For basic initial commissioning (standard drive commissioning) and commissioning drive-based Safety Integrated, SINUMERIK Operate or SINUMERIK Commissioning must be used in the SINUMERIK environment. 
The STARTER commissioning tool is not designed to provide support for this work. The STARTER commissioning tool cannot be used for offline commissioning in the SINUMERIK environment.

For more detailed information, please contact your local  Siemens contact person.

谢邹工！我想装最新版本的STARTER，嘻嘻。看来这回的最新版本，对win操作系统的兼容性还是很不错的呦。

我现在工作的笔记本电脑是WIN7操作系统。