发布于 2012-07-14 23:23:25
1楼
是的
Minimum system requirements
The following minimum requirements must be complied with:
Hardware
PG or PC with Pentium III min. 1 GHz (recommended: >1 GHz)
RAM 1 GB (recommended: 2 GB)
Screen resolution 1024 × 768 pixel, 16-bit color depth
Free hard disk memory: min. 3 GB
Software
Microsoft Internet Explorer V6.0 (or later)
32-bit operating systems:
Microsoft Windows Server 2003 SP2
Microsoft Windows Server 2008
Microsoft Windows XP Professional SP2 *) and SP3
Microsoft Windows 7 Professional incl. SP1
Microsoft Windows 7 Ultimate incl. SP1
Microsoft Windows 7 Enterprise incl. SP1 (Standard Installation)
64-bit operating systems **):
Microsoft Windows 7 Professional SP1
Microsoft Windows 7 Ultimate SP1
Microsoft Windows 7 Enterprise SP1 (Standard Installation)
Microsoft Windows Server 2008 R2
*) Limited test scope
**) The special driver for the transfer / special protocol "USS via USB" is still not yet available with 64-bit operating systems.
This affects only a few G120 with CU2xx-2 and Firmware Version V4.2 or V4.3.
The STARTER setup can only be performed for "native" Windows versions with Far Eastern languages when using a MUI version of Windows XP or Windows 7. The executability in another software configuration than the one stated above has not been tested.
下载地址
http://support.automation.siemens.com/CN/view/en/26233208