各位同業好，

我現在使用一台particle Counter LPC-101 HP，

它屬於非標準通訊協定，傳送資料為ASCII，我想把數值拉進電腦做監控，

發現KEPware有UCON可以使用，但具體怎麼設定就讓我有點苦惱，

不知道有沒有先進能提供我一些幫助呢，謝謝~

他提供的資料有以下這些

Interface: RS-232C
Data Rate: 1200 bps
Character Framing: 8-bit,one stop bit
Parity: None
Device Characteristic: DTE (transmits on pin 2,receives on pin 3)
Synchronization: Full duplex, no hardware handshake
Protocol(XON/XOFF): Recive only
All data is in ASCII

Byte Offset Field Notes
(Decimal)
00 STX Start transmission
05 Sample ID Enter from SETUP1
16 Year
19 Month
22 Day
25 Hour
28 Minute
32 Sample interval In seconds
41 Sample volume In cubic feet
50 Software version
58 Always zero
62 Always zero
66 Manifold position Zero if nine present
69 Sample number 1-50
73 Data Eight values
83 "
93 "
103 "
113 "
123 "
133 "
143 "
155 Laser referens voltage Full scale =10V
165 Analog data Six values;scale user-defined on STEP2