各位高手最近一直忙着别的事情，学习tdc拉下了一段时间，今天又开始仅做了一个cpu,一个dp模块、一个以太网模块，下载之后出现如下故障，拔下dp模块后tdc正常，请问各位高手怎么解决，是不是dp模块需要下载什么配置呀？

Diagnostic buffer of module CPU550

Order No./ Des cription Component Version
6DD1600-0BA0 Hardware 0
GSW 101600V618 Firmware V 6.1.8

Rack: ---
Slot: ---


Event 1 of 3: Event ID 16# F160:AF04
Operating status transition INIT -> STOP
Effect:
Initialization canceled (stop due to initialization error) and "0" flashes on the seven-segment display
Incoming event
03:52:15.610 AM 01/02/1993


Event 2 of 3: Event ID 16# F160:310C
PN initialization-/PN-IB error FBNIB: Group display from the initialization blocks.
Effect:
The user program doesn't run up.
Incoming event
03:52:14.610 AM 01/02/1993


Event 3 of 3: Event ID 16# F160:3024
Special periphery, IB errors Dual port RAM unable to be accessed.
Effect: