P0014[3] Store mode Min: 0
CStat: UT Datatype: U16 Unit: - Def: 0
P-Group: - Active: first confirm QuickComm.: No Max: 1
Sets the store mode for parameters ("volatile" (RAM) or "nonvolatile" (EEPROM)).
Possible Settings:
0 Volatile (RAM)
1 Nonvolatile (EEPROM)
Index:
P0014[0] : Serial interface COM link
P0014[1] : Serial interface BOP link
P0014[2] : PROFIBUS / CB
Note:
1. With the BOP the parameter will always be stored in the EEPROM.
2. P0014 itself will always be stored in the EEPROM.
3. P0014 will not be changed by performing a factory reset (P0010 = 30 and P0971 = 1).
4. P0014 can be transferred during a DOWNLOAD (P0010 = 29).
5. If "Store request via USS/CB = volatile (RAM)" and "P0014[x] = volatile (RAM)", you can make a
transfer of all parameter values into the nonvolatile memory via P0971.
6. If "Store request via USS/CB" and P0014[x] are not consistent, the setting of P14[x] = "store nonvolatile
(EEPROM)" has always higher priority.
Store request via USS/CB
EEPROM
Value of P0014[x] Result
EEPROM
EEPROM
EEPROM
EEPROM EEPROM
EEPROM
RAM
RAM
RAM
RAM RAM