回复:重发诊断刚才那个没发好

铁拳

  • 帖子

    10
  • 精华

    0
  • 被关注

    0

论坛等级:游民

注册时间:2009-07-18

普通 普通 如何晋级?

发布于 2014-06-11 21:04:10

1楼

Diagnostic buffer of module CPU 414-2 DP

Order No./ Des cription Component Version
6ES7 414-2XG04-0AB0 Hardware 1
- - - Firmware V 4.0.2

Rack: 0
Slot: 2


Event 1 of 120: Event ID 16# 4302
Mode transition from STARTUP to RUN
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered by switch setting
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- Warm restart triggered by switch setting
Previous operating mode: STARTUP (warm restart)
Requested operating mode: RUN
Incoming event
12:32:46:450 am 01/01/94


Event 2 of 120: Event ID 16# 1381
Request for manual warm restart
STOP due to: STOP caused by parameter assignment error or unpermissible difference between preset and actual configuration: startup disabled
Startup information:
- Startup without modified system configuration
- No difference between setpoint and actual configuration
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered by switch setting
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- Warm restart triggered by switch setting
Requested OB: Startup OB (OB100)
Priority class: 27
Incoming event
12:32:32:972 am 01/01/94


Event 3 of 120: Event ID 16# 4301
Mode transition from STOP to STARTUP
STOP due to: STOP caused by parameter assignment error or unpermissible difference between preset and actual configuration: startup disabled
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered by switch setting
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of the automatic startup type at power on:
- Warm restart triggered by switch setting
Previous operating mode: STOP (internal)
Requested operating mode: STARTUP (warm restart)
Incoming event
12:32:32:944 am 01/01/94


Event 4 of 120: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
- Keyswitch set to STOP
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered by switch setting
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- Warm restart triggered by switch setting
Operating mode: STOP (internal)
Incoming event
12:32:32:943 am 01/01/94


Event 5 of 120: Event ID 16# 5371
Distributed I/Os: end of the synchronization with a DP master
Slot of the DP master: 2
Number of distributed stations: 9
Priority class: 23
Incoming event
12:32:30:900 am 01/01/94


Event 6 of 120: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
- STOP request exists
- Difference in comparison of set and actual configuration
- Keyswitch set to STOP
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered by switch setting
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Incoming event
12:32:30:554 am 01/01/94


Event 7 of 120: Event ID 16# 4300
Power on backed up
Initialization information: Initialization after power on (backed up CPU)
Previous operating mode: No voltage
Requested operating mode: STOP (own initialization)
Incoming event
12:32:30:363 am 01/01/94


Event 8 of 120: Event ID 16# 494E
Power failure
Previous operating mode: STOP (internal)
Requested operating mode: No voltage
External error, Incoming event
12:32:28:350 am 01/01/94


Event 9 of 120: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
- STOP request exists
- Difference in comparison of set and actual configuration
- Keyswitch set to STOP
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered by switch setting
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Incoming event
12:32:27:384 am 01/01/94


Event 10 of 120: Event ID 16# 4303
STOP caused by stop switch being activated
Previous operating mode: STOP (internal)
Requested operating mode: STOP (internal)
Incoming event
12:32:27:384 am 01/01/94


Event 11 of 120: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
- STOP request exists
- Difference in comparison of set and actual configuration
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered by switch setting
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Incoming event
12:32:21:650 am 01/01/94


Event 12 of 120: Event ID 16# 49A0
STOP caused by parameter assignment error or unpermissible difference between preset and actual configuration: startup disabled
No relevance for user (SDB no.): 1000
No relevance for user (Z2): 7fff (Z3): 0608
Previous operating mode: STARTUP (warm restart)
Requested operating mode: STOP (internal)
External error, Incoming event
12:32:21:648 am 01/01/94


Event 13 of 120: Event ID 16# 4301
Mode transition from STOP to STARTUP
STOP due to: STOP caused by STOP command
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered by switch setting
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of the automatic startup type at power on:
- Warm restart triggered by switch setting
Previous operating mode: STOP (internal)
Requested operating mode: STARTUP (warm restart)
Incoming event
12:32:21:620 am 01/01/94




Event 16 of 120: Event ID 16# 4303
STOP caused by stop switch being activated
Previous operating mode: STOP (internal)
Requested operating mode: STOP (internal)
Incoming event
12:32:21:092 am 01/01/94
就是学
评论
编辑推荐: 关闭

请填写推广理由:

本版热门话题

SIMATIC S7-300/400

共有54616条技术帖

相关推荐

热门标签

相关帖子推荐

guzhang

恭喜,你发布的帖子

评为精华帖!

快扫描右侧二维码晒一晒吧!

再发帖或跟帖交流2条,就能晋升VIP啦!开启更多专属权限!

  • 分享

  • 只看
    楼主

top
您收到0封站内信:
×
×
信息提示
很抱歉!您所访问的页面不存在,或网址发生了变化,请稍后再试。