CPU414-4H 突然故障,全部灯闪烁

已锁定

西门子很好

  • 帖子

    1
  • 精华

    0
  • 被关注

    0

论坛等级:新手

注册时间:2015-01-06

普通 普通 如何晋级?

CPU414-4H 突然故障,全部灯闪烁

1466

2

2015-01-06 16:03:22

在巡检过程中发现CPU故障,所有灯闪烁,请教这是什么原因造成的,应该怎么处理,谢谢,急求!!
下面的是诊断信息:
Diagnostic buffer of module CPU 414-4 H

Order No./ Des cription Component Version
6ES7 414-4HJ04-0AB0 Hardware 1
- - - Firmware V 4.0.8

Rack: 1
Slot: 3


Serial number: SVPV2380330


Event 1 of 3000: Event ID 16# 45E4
Standby CPU: Change from redundant mode to error-search mode
Error-search mode: trigger event: 4533: Checksum error
Event: ###820###ANZEIGETEXTECPU=
OB number: OB 196
Priority class: 9
Previous operating mode: RUN (redundant mode)
Requested operating mode: Error-search mode
Event occurred in the master CPU in rack 0
Internal error, Incoming event
03:24:13.629 AM 01/06/2015


Event 2 of 3000: Event ID 16# 43E3
Master CPU: Change from redundant mode to solo mode
Previous operating mode: RUN (redundant mode)
Requested operating mode: RUN
Event occurred in the master CPU in rack 1
Incoming event
03:24:13.628 AM 01/06/2015


Event 3 of 3000: Event ID 16# 7331
Switchover of standby CPU and master CPU due to failure of master CPU
CPU affected: Standby CPU in rack 0
Event: Standby CPU: Change from redundant mode to error-search mode
Requested OB: CPU redundancy error OB (OB72)
Priority class: 28
Incoming event
03:24:13.628 AM 01/06/2015


Event 4 of 3000: Event ID 16# 43F1
Switchover of master CPU and standby CPU
Previous operating mode: RUN (redundant mode)
Requested operating mode: RUN (redundant mode)
Event occurred in the standby CPU in rack 1
Incoming event
03:24:13.628 AM 01/06/2015
CPU414-4H 突然故障,全部灯闪烁 已锁定
编辑推荐: 关闭

请填写推广理由:

本版热门话题

SIMATIC S7-300/400

共有54617条技术帖

相关推荐

热门标签

相关帖子推荐

guzhang

恭喜,你发布的帖子

评为精华帖!

快扫描右侧二维码晒一晒吧!

再发帖或跟帖交流2条,就能晋升VIP啦!开启更多专属权限!

  • 分享

  • 只看
    楼主

top
您收到0封站内信:
×
×
信息提示
很抱歉!您所访问的页面不存在,或网址发生了变化,请稍后再试。