我电脑是原版win7 64位，可是V90伺服驱动器调试软件usb驱动就是装不上，以下是安装V90的USB驱动的记录，请各位大神分析一下问题出在哪？

[Boot Session: 2017/12/31 10:04:00.463]

>>>  [Device Install (Hardware initiated) - USBVID_0908&PID_0402SZVJNY0R010939]

>>>  Section start 2017/12/31 16:44:10.859

     ump: Creating Install Process: DrvInst.exe 16:44:10.859

     ndv: Retrieving device info...

     ndv: Setting device parameters...

     ndv: Searching just Driver Store...

     dvi: {Build Driver List} 16:44:10.952

     dvi:      Searching for hardware ID(s):

     dvi:           usbid_0908&pid_0402&rev_0430

     dvi:           usbid_0908&pid_0402

     dvi:      Searching for compatible ID(s):

     dvi:           usbclass_02&subclass_02&prot_01

     dvi:           usbclass_02&subclass_02

     dvi:           usbclass_02

     cpy:      Policy is set to make all digital signatures equal.

     dvi:      Enumerating INFs from path list 'C:WindowsINF'

     inf:      Searched 0 potential matches in published INF directory

     sig:      {_VERIFY_FILE_SIGNATURE} 16:44:11.093

     sig:           Key      = v90.inf

     sig:           FilePath = C:WindowsINF90.inf

     sig:           Catalog  = C:WindowsINFSiemens.cat

!    sig:           Verifying file against specific (valid) catalog failed! (0x00000057)

!    sig:           Error 87: The parameter is incorrect.

     sig:      {_VERIFY_FILE_SIGNATURE exit(0x00000057)} 16:44:11.108

     sig:      {_VERIFY_FILE_SIGNATURE} 16:44:11.108

     sig:           Key      = v90.inf

     sig:           FilePath = C:WindowsINF90.inf

     sig:           Catalog  = C:WindowsINFSiemens.cat

!    sig:           Verifying file against specific Authenticode(tm) catalog failed! (0x80092003)

!    sig:           Error 0x80092003: An error occurred while reading or writing to a file.

     sig:      {_VERIFY_FILE_SIGNATURE exit(0x80092003)} 16:44:11.124

!    dvi:      Match in unpublished INF skipped - INF not properly staged to Driver Store

     inf:      Searched 48 INFs in directory: 'C:WindowsINF'

     dvi: {Build Driver List - exit(0x00000000)} 16:44:11.155

     ndv: Selecting best match from just Driver Store...

     dvi: {DIF_SELECTBESTCOMPATDRV} 16:44:11.155

     dvi:      No class installer for 'Sinamics vx0_g2'

     dvi:      No CoInstallers found

     dvi:      Default installer: Enter 16:44:11.155

     dvi:           {Select Best Driver}

!    dvi:                Selecting driver failed(0xe0000228)

     dvi:           {Select Best Driver - exit(0xe0000228)}

!    dvi:      Default installer: failed!

!    dvi:      Error 0xe0000228: There are no compatible drivers for this device.

     dvi: {DIF_SELECTBESTCOMPATDRV - exit(0xe0000228)} 16:44:11.171

     ndv: Skipping Windows Update because no internet connection!

     ndv: Searching Driver Store and Device Path...

     dvi: {Build Driver List} 16:44:11.186

     dvi:      Searching for hardware ID(s):

     dvi:           usbid_0908&pid_0402&rev_0430

     dvi:           usbid_0908&pid_0402

     dvi:      Searching for compatible ID(s):

     dvi:           usbclass_02&subclass_02&prot_01

     dvi:           usbclass_02&subclass_02

     dvi:           usbclass_02

     cpy:      Policy is set to make all digital signatures equal.

     dvi:      Enumerating INFs from path list 'C:Windowsinf'

     inf:      Searched 0 potential matches in published INF directory

     sig:      {_VERIFY_FILE_SIGNATURE} 16:44:11.264

     sig:           Key      = v90.inf

     sig:           FilePath = C:Windowsinf90.inf

     sig:           Catalog  = C:WindowsinfSiemens.cat

!    sig:           Verifying file against specific (valid) catalog failed! (0x00000057)

!    sig:           Error 87: The parameter is incorrect.

     sig:      {_VERIFY_FILE_SIGNATURE exit(0x00000057)} 16:44:11.264

     sig:      {_VERIFY_FILE_SIGNATURE} 16:44:11.264

     sig:           Key      = v90.inf

     sig:           FilePath = C:Windowsinf90.inf

     sig:           Catalog  = C:WindowsinfSiemens.cat

!    sig:           Verifying file against specific Authenticode(tm) catalog failed! (0x80092003)

!    sig:           Error 0x80092003: An error occurred while reading or writing to a file.

     sig:      {_VERIFY_FILE_SIGNATURE exit(0x80092003)} 16:44:11.280

     dvi:      Created Driver Node:

     dvi:           HardwareID   - USBVID_0908&PID_0402

     dvi:           InfName      - C:Windowsinf90.inf

     dvi:           DevDesc      - SMART Drive Configration Port

     dvi:           DrvDesc      - SMART Drive Configration Port

     dvi:           Provider     - Siemens Numeric Control, Nan Jing

     dvi:           Mfg          - Siemens Numeric Control, Nan Jing

     dvi:           ModelsSec    - DeviceList.NTamd64

     dvi:           InstallSec   - DriverInstall

     dvi:           ActualSec    - DriverInstall.NTAMD64

     dvi:           Rank         - 0x80ff0001

     dvi:           Signer       - 未经数字签名

     dvi:           Signer Score - Not digitally signed

     dvi:           DrvDate      - 10/15/2012

     dvi:           Version      - 1.1.0.0

     inf:      Searched 48 INFs in directory: 'C:Windowsinf'

     dvi: {Build Driver List - exit(0x00000000)} 16:44:11.358

     ndv: Selecting best match from Driver Store (including Device Path)...

     dvi: {DIF_SELECTBESTCOMPATDRV} 16:44:11.358

     dvi:      Using exported function 'PortsClassInstaller' in module 'C:Windowssystem32MsPorts.Dll'.

     dvi:      Class installer == MsPorts.Dll,PortsClassInstaller

     dvi:      No CoInstallers found

     dvi:      Class installer: Enter 16:44:11.373

     dvi:      Class installer: Exit

     dvi:      Default installer: Enter 16:44:11.373

     dvi:           {Select Best Driver}

     dvi:                Selected driver installs from section [DriverInstall] in 'c:windowsinf90.inf'.

     dvi:                Class GUID of device changed to: {4d36e978-e325-11ce-bfc1-08002be10318}.

     dvi:                {DIF_DESTROYPRIVATEDATA} 16:44:11.373

     dvi:                     Class installer: Enter 16:44:11.373

     dvi:                     Class installer: Exit

     dvi:                     Default installer: Enter 16:44:11.373

     dvi:                     Default installer: Exit

     dvi:                {DIF_DESTROYPRIVATEDATA - exit(0xe000020e)} 16:44:11.373

     dvi:                Set selected driver complete.

     dvi:                Selected:

     dvi:                     Description - [SMART Drive Configration Port]

     dvi:                     InfFile     - [c:windowsinf90.inf]

     dvi:                     Section     - [DriverInstall]

     dvi:                     Signer      - [未经数字签名]

     dvi:                     Rank        - [0x80ff0001]

     dvi:           {Select Best Driver - exit(0x00000000)}

     dvi:      Default installer: Exit

     dvi: {DIF_SELECTBESTCOMPATDRV - exit(0x00000000)} 16:44:11.389

     inf: {SetupCopyOEMInf: c:windowsinf90.inf} 16:44:11.389

     inf:      Published Inf Path: c:windowsinf90.inf

     inf: {SetupCopyOEMInf exit (0x00000050)} 16:44:11.389

     dvi: Searching for hardware ID(s):

     dvi:      usbid_0908&pid_0402&rev_0430

     dvi:      usbid_0908&pid_0402

     dvi: Searching for compatible ID(s):

     dvi:      usbclass_02&subclass_02&prot_01

     dvi:      usbclass_02&subclass_02

     dvi:      usbclass_02

     inf: Opened INF: 'C:WindowsINF90.inf' ([strings])

     sig: {_VERIFY_FILE_SIGNATURE} 16:44:11.405

     sig:      Key      = v90.inf

     sig:      FilePath = C:WindowsINF90.inf

     sig:      Catalog  = C:WindowsINFSiemens.cat

!    sig:      Verifying file against specific (valid) catalog failed! (0x00000057)

!    sig:      Error 87: The parameter is incorrect.

     sig: {_VERIFY_FILE_SIGNATURE exit(0x00000057)} 16:44:11.405

     sig: {_VERIFY_FILE_SIGNATURE} 16:44:11.405

     sig:      Key      = v90.inf

     sig:      FilePath = C:WindowsINF90.inf

     sig:      Catalog  = C:WindowsINFSiemens.cat

!    sig:      Verifying file against specific Authenticode(tm) catalog failed! (0x80092003)

!    sig:      Error 0x80092003: An error occurred while reading or writing to a file.

写不下了，后面部分在下面的跟帖上