可以用来修改参数，不过还是用SICOMU软件比较方便
“_ _ _ run” is presently being displayed.
Operator control sequence:
1. Enable the parameterizing mode
––> press any key on the operator unit (e.g. “P”)
2. Select drive B
––> Simultaneously press the PLUS and MINUS keys
3. Cancel write protection
––> Set P0651 = 4
4. Activate inversion, terminal 56.B/14.B
––> Set P0608 = 1
5. Save parameters in the FEPROM
––> Set P0652 = 1
6. Re–activate write protection
––> Set P0651 = 0