请问S7 416-3CPU出现内部故障,无法运行是什么原因
故障信息如下:
Diagnostic buffer of module CPU 416-3 DP
Order No./ Des cription Component Version
6ES7 416-3XL00-0AB0 Hardware 7
- - - Firmware V 3.1.3
Event 1 of 58: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
- STOP request exists
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last non backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered via MPI
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Incoming event
02:18:28:146 am 01/01/94
Event 2 of 58: Event ID 16# 456D
STOP caused by program sequence error (OB not loaded or not possible, or no FRB)
Previous operating mode: STARTUP (warm restart)
Requested operating mode: STOP (internal)
Internal error, Incoming event
02:18:28:144 am 01/01/94
Event 3 of 58: Event ID 16# 39B1
I/O access error when updating the process image input table
P area, double-word access, access address: 0
process image partition no.: 0
not user relevant(Z1): 2942
OB number: 85
OB not found, or disabled, or cannot be started in the current operating mode
External error, Incoming event
02:18:28:144 am 01/01/94
Event 4 of 58: Event ID 16# 1381
Request for manual warm restart
STOP due to: STOP caused by PG stop operation or by SFB 20 "STOP"
Startup information:
- Startup without modified system configuration
- Difference between setpoint and actual configuration
- Time for time stamp at the last non backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered via MPI
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- Warm restart triggered via MPI
OB number: 100
OB not found, or disabled, or cannot be started in the current operating mode
Incoming event
02:18:27:122 am 01/01/94
Event 5 of 58: Event ID 16# 4301
Mode transition from STOP to STARTUP
STOP due to: STOP caused by PG stop operation or by SFB 20 "STOP"
Startup information:
- Time for time stamp at the last non backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered via MPI
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of the automatic startup type at power on:
- Warm restart triggered via MPI
Previous operating mode: STOP (internal)
Requested operating mode: STARTUP (warm restart)
Incoming event
02:18:27:088 am 01/01/94
Event 6 of 58: Event ID 16# 5371
Distributed I/Os: end of the synchronization with a DP master
Slot of the DP master: 3
Number of distributed stations: 0
Priority class: 23, Ereignis per SFC erzeugt
Incoming event
02:18:27:084 am 01/01/94
Event 7 of 58: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last non backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered via MPI
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- Warm restart triggered via MPI
Operating mode: STOP (internal)
Incoming event
02:17:23:378 am 01/01/94
Event 8 of 58: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
- STOP request exists
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last non backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered via MPI
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Incoming event
02:17:21:978 am 01/01/94
Event 9 of 58: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
- Module or submodule assignment not evaluated or evaluation aborted with errors (SDB 1,3,5,2X,9X)
- STOP request exists
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last non backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered via MPI
Permissibility of certain startup types:
- Manual startup not permitted, corrections in parameter assignment, submodule, etc. necessary
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Incoming event
02:17:21:968 am 01/01/94
Event 10 of 58: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
Loading user program or internal inconsistency detected
(SDBs less than 200 incomplete, superfluous, or incorrect)
- Parameter assignment for MPI or DP interfaces not evaluated or inconsistent
(SDB1XXX incomplete, superfluous, or incorrect)
- Module or submodule assignment not evaluated or evaluation aborted with errors (SDB 1,3,5,2X,9X)
- STOP request exists
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last non backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered via MPI
Permissibility of certain startup types:
- Manual startup not permitted, corrections in parameter assignment, submodule, etc. necessary
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Incoming event
02:17:21:051 am 01/01/94
Event 11 of 58: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
Loading user program or internal inconsistency detected
(SDBs less than 200 incomplete, superfluous, or incorrect)
- Parameter assignment for MPI or DP interfaces not evaluated or inconsistent
(SDB1XXX incomplete, superfluous, or incorrect)
- STOP request exists
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last non backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered via MPI
Permissibility of certain startup types:
- Manual startup not permitted, corrections in parameter assignment, submodule, etc. necessary
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Incoming event
02:17:20:930 am 01/01/94
Event 12 of 58: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
- STOP request exists
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last non backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered via MPI
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Incoming event
02:17:20:894 am 01/01/94
Event 13 of 58: Event ID 16# 4304
STOP caused by PG stop operation or by SFB 20 "STOP"
Previous operating mode: RUN
Requested operating mode: STOP (internal)
Incoming event
02:17:20:892 am 01/01/94
Event 14 of 58: Event ID 16# 4302
Mode transition from STARTUP to RUN
Startup information:
- Time for time stamp at the last non backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered via MPI
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- Warm restart triggered via MPI
Previous operating mode: STARTUP (warm restart)
Requested operating mode: RUN
Incoming event
02:05:41:149 am 01/01/94
Event 15 of 58: Event ID 16# 1381
Request for manual warm restart
STOP due to: STOP caused by program sequence error (OB not loaded or not possible, or no FRB)
Startup information:
- Startup without modified system configuration
- No difference between setpoint and actual configuration
- Time for time stamp at the last non backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered via MPI
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- Warm restart triggered via MPI
OB number: 100
OB not found, or disabled, or cannot be started in the current operating mode
Incoming event
02:05:40:127 am 01/01/94
Event 16 of 58: Event ID 16# 4301
Mode transition from STOP to STARTUP
STOP due to: STOP caused by program sequence error (OB not loaded or not possible, or no FRB)
Startup information:
- Time for time stamp at the last non backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered via MPI
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of the automatic startup type at power on:
- Warm restart triggered via MPI
Previous operating mode: STOP (internal)
Requested operating mode: STARTUP (warm restart)
Incoming event
02:05:40:093 am 01/01/94
Event 17 of 58: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last non backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered via MPI
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- Warm restart triggered via MPI
Operating mode: STOP (internal)
Incoming event
02:05:40:092 am 01/01/94
Event 18 of 58: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
- STOP request exists
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last non backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered via MPI
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Incoming event
02:05:38:691 am 01/01/94
Event 19 of 58: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
- Module or submodule assignment not evaluated or evaluation aborted with errors (SDB 1,3,5,2X,9X)
- STOP request exists
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last non backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered via MPI
Permissibility of certain startup types:
- Manual startup not permitted, corrections in parameter assignment, submodule, etc. necessary
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Incoming event
02:05:38:680 am 01/01/94
Event 20 of 58: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
Loading user program or internal inconsistency detected
(SDBs less than 200 incomplete, superfluous, or incorrect)
- Parameter assignment for MPI or DP interfaces not evaluated or inconsistent
(SDB1XXX incomplete, superfluous, or incorrect)
- Module or submodule assignment not evaluated or evaluation aborted with errors (SDB 1,3,5,2X,9X)
- STOP request exists
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last non backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered via MPI
Permissibility of certain startup types:
- Manual startup not permitted, corrections in parameter assignment, submodule, etc. necessary
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Incoming event
02:05:37:896 am 01/01/94
Event 21 of 58: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
Loading user program or internal inconsistency detected
(SDBs less than 200 incomplete, superfluous, or incorrect)
- Parameter assignment for MPI or DP interfaces not evaluated or inconsistent
(SDB1XXX incomplete, superfluous, or incorrect)
- STOP request exists
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last non backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered via MPI
Permissibility of certain startup types:
- Manual startup not permitted, corrections in parameter assignment, submodule, etc. necessary
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Incoming event
02:05:37:709 am 01/01/94
Event 22 of 58: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
- STOP request exists
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last non backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered via MPI
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Incoming event
02:05:08:548 am 01/01/94
Event 23 of 58: Event ID 16# 456D
STOP caused by program sequence error (OB not loaded or not possible, or no FRB)
Previous operating mode: STARTUP (warm restart)
Requested operating mode: STOP (internal)
Internal error, Incoming event
02:05:08:546 am 01/01/94
Event 24 of 58: Event ID 16# 39B1
I/O access error when updating the process image input table
P area, double-word access, access address: 0
process image partition no.: 0
not user relevant(Z1): 2942
OB number: 85
OB not found, or disabled, or cannot be started in the current operating mode
External error, Incoming event
02:05:08:546 am 01/01/94
Event 25 of 58: Event ID 16# 5961
Parameter assignment error in parameters for distributed S7 modules
Input address: 16381 of the module with parameter assignment errors
Error type: Slot configured for CPU is empty
Data record number: 250
Operating mode: STARTUP (warm restart)
External error, Incoming event
02:05:08:526 am 01/01/94
Event 26 of 58: Event ID 16# 1381
Request for manual warm restart
STOP due to: STOP caused by program sequence error (OB not loaded or not possible, or no FRB)
Startup information:
- Startup without modified system configuration
- Difference between setpoint and actual configuration
- Time for time stamp at the last non backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered via MPI
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- Warm restart triggered via MPI
OB number: 100
OB not found, or disabled, or cannot be started in the current operating mode
Incoming event
02:05:07:522 am 01/01/94
Event 27 of 58: Event ID 16# 4301
Mode transition from STOP to STARTUP
STOP due to: STOP caused by program sequence error (OB not loaded or not possible, or no FRB)
Startup information:
- Time for time stamp at the last non backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered via MPI
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of the automatic startup type at power on:
- Warm restart triggered via MPI
Previous operating mode: STOP (internal)
Requested operating mode: STARTUP (warm restart)
Incoming event
02:05:07:488 am 01/01/94
Event 28 of 58: Event ID 16# 5371
Distributed I/Os: end of the synchronization with a DP master
Slot of the DP master: 3
Number of distributed stations: 0
Priority class: 23, Ereignis per SFC erzeugt
Incoming event
02:05:07:484 am 01/01/94
Event 29 of 58: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last non backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered via MPI
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- Warm restart triggered via MPI
Operating mode: STOP (internal)
Incoming event
02:04:07:569 am 01/01/94
Event 30 of 58: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
- STOP request exists
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last non backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered via MPI
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Incoming event
02:04:02:364 am 01/01/94
Event 31 of 58: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
- Module or submodule assignment not evaluated or evaluation aborted with errors (SDB 1,3,5,2X,9X)
- STOP request exists
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last non backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered via MPI
Permissibility of certain startup types:
- Manual startup not permitted, corrections in parameter assignment, submodule, etc. necessary
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Incoming event
02:04:02:353 am 01/01/94
Event 32 of 58: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
Loading user program or internal inconsistency detected
(SDBs less than 200 incomplete, superfluous, or incorrect)
- Module or submodule assignment not evaluated or evaluation aborted with errors (SDB 1,3,5,2X,9X)
- STOP request exists
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last non backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered via MPI
Permissibility of certain startup types:
- Manual startup not permitted, corrections in parameter assignment, submodule, etc. necessary
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Incoming event
02:04:01:633 am 01/01/94
Event 33 of 58: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
- Module or submodule assignment not evaluated or evaluation aborted with errors (SDB 1,3,5,2X,9X)
- STOP request exists
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last non backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered via MPI
Permissibility of certain startup types:
- Manual startup not permitted, corrections in parameter assignment, submodule, etc. necessary
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Incoming event
02:04:00:759 am 01/01/94
Event 34 of 58: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
Loading user program or internal inconsistency detected
(SDBs less than 200 incomplete, superfluous, or incorrect)
- Module or submodule assignment not evaluated or evaluation aborted with errors (SDB 1,3,5,2X,9X)
- STOP request exists
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last non backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered via MPI
Permissibility of certain startup types:
- Manual startup not permitted, corrections in parameter assignment, submodule, etc. necessary
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Incoming event
02:03:59:577 am 01/01/94
Event 35 of 58: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
Loading user program or internal inconsistency detected
(SDBs less than 200 incomplete, superfluous, or incorrect)
- Parameter assignment for MPI or DP interfaces not evaluated or inconsistent
(SDB1XXX incomplete, superfluous, or incorrect)
- Module or submodule assignment not evaluated or evaluation aborted with errors (SDB 1,3,5,2X,9X)
- STOP request exists
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last non backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered via MPI
Permissibility of certain startup types:
- Manual startup not permitted, corrections in parameter assignment, submodule, etc. necessary
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Incoming event
02:03:59:511 am 01/01/94
Event 36 of 58: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
Loading user program or internal inconsistency detected
(SDBs less than 200 incomplete, superfluous, or incorrect)
- Parameter assignment for MPI or DP interfaces not evaluated or inconsistent
(SDB1XXX incomplete, superfluous, or incorrect)
- STOP request exists
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last non backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered via MPI
Permissibility of certain startup types:
- Manual startup not permitted, corrections in parameter assignment, submodule, etc. necessary
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Incoming event
02:03:59:195 am 01/01/94
Event 37 of 58: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
- STOP request exists
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last non backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered via MPI
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Incoming event
12:02:10:554 am 01/01/94
Event 38 of 58: Event ID 16# 456D
STOP caused by program sequence error (OB not loaded or not possible, or no FRB)
Previous operating mode: STARTUP (warm restart)
Requested operating mode: STOP (internal)
Internal error, Incoming event
12:02:10:552 am 01/01/94
Event 39 of 58: Event ID 16# 39B1
I/O access error when updating the process image input table
P area, double-word access, access address: 512
process image partition no.: 0
not user relevant(Z1): 2942
OB number: 85
OB not found, or disabled, or cannot be started in the current operating mode
External error, Incoming event
12:02:10:552 am 01/01/94
Event 40 of 58: Event ID 16# 5961
Parameter assignment error in parameters for distributed S7 modules
Input address: 16381 of the module with parameter assignment errors
Error type: Slot configured for CPU is empty
Data record number: 250
Operating mode: STARTUP (warm restart)
External error, Incoming event
12:02:10:530 am 01/01/94
Event 41 of 58: Event ID 16# 5961
Parameter assignment error in parameters for distributed S7 modules
Input address: 512 of the module with parameter assignment errors
Error type: Slot configured for CPU is empty
Data record number: 0
Operating mode: STARTUP (warm restart)
External error, Incoming event
12:02:10:527 am 01/01/94
Event 42 of 58: Event ID 16# 1381
Request for manual warm restart
STOP due to: STOP caused by PG stop operation or by SFB 20 "STOP"
Startup information:
- Startup without modified system configuration
- Difference between setpoint and actual configuration
- Time for time stamp at the last non backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered via MPI
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- Warm restart triggered via MPI
OB number: 100
OB not found, or disabled, or cannot be started in the current operating mode
Incoming event
12:02:09:523 am 01/01/94
Event 43 of 58: Event ID 16# 4301
Mode transition from STOP to STARTUP
STOP due to: STOP caused by PG stop operation or by SFB 20 "STOP"
Startup information:
- Time for time stamp at the last non backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered via MPI
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of the automatic startup type at power on:
- Warm restart triggered via MPI
Previous operating mode: STOP (internal)
Requested operating mode: STARTUP (warm restart)
Incoming event
12:02:09:488 am 01/01/94
Event 44 of 58: Event ID 16# 5371
Distributed I/Os: end of the synchronization with a DP master
Slot of the DP master: 3
Number of distributed stations: 0
Priority class: 23, Ereignis per SFC erzeugt
Incoming event
12:02:09:484 am 01/01/94
Event 45 of 58: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last non backed up power on
- Single processor operation
Current/last startup type:
- Automatic warm restart after non backed up power on (with system memory reset)
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- Warm restart triggered via MPI
Operating mode: STOP (internal)
Incoming event
12:01:13:481 am 01/01/94
Event 46 of 58: Event ID 16# 6981
Interface error entering state
Interface ID: DP bus
OB number: 4
External error, Incoming event
12:01:04:588 am 01/01/94
Event 47 of 58: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
- STOP request exists
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last non backed up power on
- Single processor operation
Current/last startup type:
- Automatic warm restart after non backed up power on (with system memory reset)
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Incoming event
12:01:04:388 am 01/01/94
Event 48 of 58: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
Loading user program or internal inconsistency detected
(SDBs less than 200 incomplete, superfluous, or incorrect)
- STOP request exists
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last non backed up power on
- Single processor operation
Current/last startup type:
- Automatic warm restart after non backed up power on (with system memory reset)
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Incoming event
12:01:03:572 am 01/01/94
Event 49 of 58: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
- STOP request exists
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last non backed up power on
- Single processor operation
Current/last startup type:
- Automatic warm restart after non backed up power on (with system memory reset)
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Incoming event
12:01:02:581 am 01/01/94
Event 50 of 58: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
Loading user program or internal inconsistency detected
(SDBs less than 200 incomplete, superfluous, or incorrect)
- STOP request exists
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last non backed up power on
- Single processor operation
Current/last startup type:
- Automatic warm restart after non backed up power on (with system memory reset)
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Incoming event
12:01:01:518 am 01/01/94
Event 51 of 58: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
- STOP request exists
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last non backed up power on
- Single processor operation
Current/last startup type:
- Automatic warm restart after non backed up power on (with system memory reset)
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Incoming event
12:01:01:355 am 01/01/94
Event 52 of 58: Event ID 16# 4304
STOP caused by PG stop operation or by SFB 20 "STOP"
Previous operating mode: RUN
Requested operating mode: STOP (internal)
Incoming event
12:01:01:352 am 01/01/94
Event 53 of 58: Event ID 16# 4302
Mode transition from STARTUP to RUN
Startup information:
- Time for time stamp at the last non backed up power on
- Single processor operation
Current/last startup type:
- Automatic warm restart after non backed up power on (with system memory reset)
Permissibility of certain startup types:
- Manual warm restart permitted
- Automatic warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- Automatic warm restart after non backed up power on (with system memory reset)
Previous operating mode: STARTUP (warm restart)
Requested operating mode: RUN
Incoming event
12:00:04:110 am 01/01/94
Event 54 of 58: Event ID 16# 1382
Request for automatic warm restart
STOP due to: Memory reset started automatically (power on not backed up )
Startup information:
- Startup without modified system configuration
- No difference between setpoint and actual configuration
- Time for time stamp at the last non backed up power on
- Single processor operation
Current/last startup type:
- Automatic warm restart after non backed up power on (with system memory reset)
Permissibility of certain startup types:
- Manual warm restart permitted
- Automatic warm restart permitted
Last valid operation or setting of the automatic startup type at power on:
- Automatic warm restart after non backed up power on (with system memory reset)
OB number: 100
OB not found, or disabled, or cannot be started in the current operating mode
Incoming event
12:00:03:089 am 01/01/94
Event 55 of 58: Event ID 16# 4301
Mode transition from STOP to STARTUP
STOP due to: Memory reset started automatically (power on not backed up )
Startup information:
- Time for time stamp at the last non backed up power on
- Single processor operation
Current/last startup type:
- Automatic warm restart after non backed up power on (with system memory reset)
Permissibility of certain startup types:
- Manual warm restart permitted
- Automatic warm restart permitted
Last valid operation or setting of the automatic startup type at power on:
- Automatic warm restart after non backed up power on (with system memory reset)
Previous operating mode: STOP (internal)
Requested operating mode: STARTUP (warm restart)
Incoming event
12:00:03:055 am 01/01/94
Event 56 of 58: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last non backed up power on
- Single processor operation
Current/last startup type:
- No startup type/following memory reset
Permissibility of certain startup types:
- Manual warm restart permitted
- Automatic warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- Automatic warm restart after non backed up power on (with system memory reset)
Operating mode: STOP (internal)
Incoming event
12:00:03:031 am 01/01/94
Event 57 of 58: Event ID 16# 430E
Memory reset executed
Initialization information: Memory reset due to inconsistent data
Previous operating mode: STOP (memory reset)
Requested operating mode: STOP (own initialization)
Incoming event
12:00:00:054 am 01/01/94
Event 58 of 58: Event ID 16# 4309
Memory reset started automatically (power on not backed up )
Initialization information: Memory reset due to inconsistent data
No relevance for user (Z1): 0001
Previous operating mode: No voltage
Requested operating mode: STOP (memory reset)
Incoming event
12:00:00:001 am 01/01/94