如何安装 WINDOWS NT SERVER 4.0 ENGLISH？
如何驱动SCSI 接口硬盘？

最新买的西门子工控机6ES7 643-7DD31-2AX0
SIMATIC Rack PC 840 V2
Pentium 4 2.4GHz,533MHz FSB,512 KB SLCProfibus/MPI，SCSI36 GB ，HDD;AH29160;internally mounted 0.5g vibration,5g Shock，1GByte DDR SDRAM(2 x 512 MB)，Floppy Drive 1.44MB,3.5" & DVD-ROM 110/230V Industrial PS with Namur;PS cord CH，AGP-Grafics,onboard，10/100 Mbit/s Ethernet RJ45，1xUSB frontside;2xUSB，ackside，Watchdog,Temperatur Control;Board Retainer，5 PCI(long), 2 PCI/ISA(long), 3 ISA(long);

SCSI接口类型：Adaptec Ultra160 Family PCI SCSI Controller
硬盘类型：FUJITSU MODEL MAW3073NP Ultra 320 scsi/68-pin/lvd
安装WINDOWS NT SERVER ENGLISH 4.0 的版本。

根据一般步骤：
引导软盘安装1。Start your system with the Windows NT Boot Disk in the floppy disk drive.
When prompted, insert disk #2 in your floppy disk drive. After a few moments you will see a blue screen. To setup Windows NT now, press Enter.
2。Press S to skip auto-detection of your SCSI host adapter.
3。Press S again to specify an additional device.
4。Press Enter to select Others; insert the Ultra160 Family Manager Set disk for Windows in your floppy disk drive.
5。Using the arrow keys, select the following driver and press Enter:
Adaptec Ultra160 Family PCI SCSI Controller (NT4.0)
6。To add other host adapters that are not part of the Ultra160 Family, press S and repeat from Step 5 for each additional adapter and insert the appropriate driver disk. The Adaptec Ultra160 Family host adapters use the same driver; it is not necessary to install the driver again.
6。Press Enter to continue with the Windows NT operating system setup. Follow the instructions on-screen and in the Windows NT documentation to complete the installation.

Note: If you have a Dell Precision Workstation, your system was shipped with a Resource CD that can be used to install, or reinstall, Microsoft Windows NT 4.x and the Adaptec Ultra160 SCSI driver. Please refer to the Resource CD User's Guide for complete instructions for installing Windows NT 4.x

在第一步的时候就出现 蓝屏，
1。 SYSTEM PROCESSON []991MB Memory] Multiprecessor kernel
Step: 0x000000007B (0xF2813BD4,0XC0000034,0X0000000,0X0000000)
CPUID: Genuineintel 7.2.9 irql:0 sysver 0xf0000565
DLL Base DateStemp -Name
......

Restart and set the recovery Options in the system control panel or the /CRASHDEBUG system start option,if this message,reappears,contact your system administrator or technical Support group.......
其中有 很多 DLL，EXE ，地址。

直接光盘引导安装：
Completing a Fresh Windows NT 4.0 Installation From CD-ROM
Insert the Windows NT 4.0 CD into the CD-ROM drive.
Start your system. Press the F6 key when you see the following message: "Setup is inspecting your computer's hardware configuration..."
If you do not see this message, your system may not be setup to boot from a CD-ROM. You will need to install from floppy disks. See Completing a Fresh Windows NT 4.0 Installation From Floppy Disk.

When prompted, press S to specify an additional device.
Press Enter to select Others; insert the Ultra160 Family Manager Set disk for Windows in your floppy disk drive.
Using the arrow keys, select the following driver and press Enter:
Adaptec Ultra160 Family PCI SCSI Controller (NT4.0)

To add other host adapters that are not part of the Ultra160 Family Manager Set , press S and repeat from Step 4 for each additional adapter and insert the appropriate driver disk. The Adaptec Ultra160 Family host adapters use the same driver; it is not necessary to install the driver again.
Press Enter to continue with the Windows NT operating system setup. Follow the instructions on-screen and in the Windows NT documentation to complete the installation. Note: If you have a Dell Precision Workstation, your system was shipped with a Resource CD that can be used to install, or reinstall, MIcrosoft Windows NT 4.x and the Adaptec Ultra160 SCSI driver. Please refer to the Resource CD User's Guide for complete instructions for installing Windows NT 4.x

到最后提示输入安装路径 WINNT
按Enter
检测C 盘，后又提示：
请插入 标有 Ultra160 Family Manager Set v4.0 Server park3 的安装软盘。 按Enter 确认。
但插如驱动盘，按Enter 根本不读盘。