Des cription:
This MD can be set so that only changed MD and setting data are backed up.
It can be set to output either all data or only data which deviates from the
default setting via the RS232C.
If a value is changed in a data which is stored as an array, then the complete
MD array will always be output (e.g. MD 10000: AXCONF_MA-CHAX_
NAME_TAB).
Select differential MD upload:
Bit0(LSB) Effectiveness of the differential upload with TEA files
0: All data is output
1: Only MDs which have changed in comparison to the compiled value are output
Bit1 As bit 0
Bit2 Change to a field element
0: Complete array is output
1: Only changed field elements of an array are output
Bit3 R parameters (only for INI files)
0: All R parameters are output
1: Only R parameters not equal to '0' are output
Bit4 Frames (only for INI files)
0: All frames are output
1: Only frames which are not zero frames are output.
Bit5 Tool data (cutting edge parameters) (only for INI files)
0: All tool data is output
1: Only tool data not equal to '0' is output.
Bit6 Buffered system variables ($AC_MARKER[], $AC_PARAM[] only for INI files)
0: All system variables are output
1: Only system variables not equal to '0' are output
Bit7 Synchronized actions GUD (for INI files only)
0: All Syna GUD are output
1: Only Syna GUD not equal to '0' are output
Active: The change in the data becomes active on the start of the upload for
the next area.
11210 UPLOAD_MD_CHANGES_ONLY N01, N05 IAD
- Machine data backup of changed machine data only BYTE SOFORT
-
- - 0xFF - - 7/3