36050 CLAMP_POS_TOL
MD number Clamping tolerance at interface signal ”Clamping active“
Default: 0.5 Min. input limit: 0.0 Max. input limit: ***
Change valid after NEW_CONF Protection level: 2/2 Unit: mm; degrees
Data type: DOUBLE Valid from SW release:
Meaning: The interface signal ”Clamping process running” (V380x0002.3) activates clamping monitoring. If
the monitored axis is pushed off the set position (exact stop limit) more than specified in the
clamping tolerance, alarm 26000 ”Clamping monitoring” is generated and the axis stopped.
Special cases, errors, ...... The clamping tolerance must be greater than the “Exact stop limit coarse”.
Related to .... IS ”Clamping process running“