611A 换控制板步骤
1.Power–up the unit――― (supply ON)新板上电。
2.Does the operating display”P–000” appear？ yes 往下 no 跳到7.步（有报警的解决报警）
3. Set P–051 to 4H(remove write protection 打开写保护
4. Set P–097 to 0H(start initialization)初始化
5. Set P–052 to 1H(write into FEPROM 写入FEPROM
6. Wait until P–052 is again set to 0H,then switch the converter off and 2 s after the operating display has been canceled, power–up again 等待2秒52自动变为0H 断电重启。
7. Display ”P–095” or ”P–096”
8. Enter and check 输入以下参数
P–095 power modulecode number
. P-096 :ENTER the motor type
P-098 :ENTER the numter of encoder pulses per motor revolution。