请参照以下处理此报警。
14414 Channel %1 block %2 GEOAX function: incorrect call
Parameters: %1 = Channel number
%2 = Block number, label
Definitions: The parameters for the GEOAX(...) call are incorrect. Possible causes:
• Uneven number of parameters.
• More than 6 parameters were specified.
• A geometry axis number was programmed which was smaller than 0 or greater than 3.
• A geometry number was programmed more than once.
• An axis identifier was programmed more than once.
• An attempt was made to assign a channel axis to a geometry axis which has the same
name as one of the channel axes.
• An attempt was made to remove a geometry axis from the geometry axis grouping and
the geometry axis has the same name as one of the channel axes.
Reactions: - Alarm display.
- Interface signals are set.
- Correction block is reorganized.
Remedy: Modify part program or correction block.
Program Continuation: Clear alarm with NC START or RESET key and continue the program.