32010 JOG_VELO_RAPID A11, A04 H1
mm/min, rev/min Rapid traverse in jog mode DOUBLE RESET
The axis velocity entered applies when the rapid traverse override key is
operated in JOG mode and when the axial feedrate override is set to 100%.
The value entered must not exceed the maximum permissible axis velocity
(machine data MAX_AX_VELO).
This machine data is not used for the programmed rapid traverse G00.
MD irrelevant for:
Operating modes AUTOMATIC and MDI
Related to:
MD: MAX_AX_VELO (maximum axis velocity)
MD: JOG_REV_VELO_RAPID
(revolutional feedrate for JOG with rapid traverse override)
IS "Rapid traverse override" (DB21-28, DBX12.5