现场是一套414-4H V4.52 得冗余系统,现在突然出现一个分布式I/O断电同时RACK0 CPU1(平时是MASKTER) 处于停止位置,无法软/硬重新启动CPU同时BUS1总线也在报错,只是自动切换到RACK1 CPU2 切换为了MASKTER CPU BUS2总线工作,通过排查总线问题已经没有问题了,但是RACK0得 CPU还是无法运行,通过诊断报告里大多是530D 得错误,但是查不到相关资料,希望哪位工程师帮忙分析下,谢谢!
Diagnostic buffer of module CPU 414-4 H

Order No./ Des cription Component Version
6ES7 414-4HM14-0AB0 Hardware 1
- - - Firmware V 4.5.2

Rack: 0
Slot: 3


Event 1 of 120: Event ID 16# 5371
Distributed I/Os: end of the synchronization with a DP master
Slot of the DP master: 3 in rack 0
Number of distributed stations: 0
Event occurred in the standby CPU in rack 0
Incoming event
12:23:27.596 AM 08/09/1994


Event 2 of 120: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
- STOP request exists
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Delayed connection repeat after time error for H CPUs
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
事件 2 / 120: 事件 ID 16# 530D
STOP 模式中的新启动信息
启动被阻止：
- 模块或子模块分配未评估或评估因出错而中止(SDB 13,5,2X,9X)
- 存在 STOP 请求
- 需要冷重启或暖重启
启动信息：
- 最后一次上电时，时间标志的时间缓存
- 单处理器操作
当前/上次启动类型：
- 没有启动类型/存储器复位后
某些启动类型的容许性：
- 不允许手动启动，需要修正参数分配、子模块等等。
上电时自动启动类型的最后有效操作或设置：
- 没有启动类型/存储器复位后
工作模式：STOP (内部)
进入的事件
Event occurred in the standby CPU in rack 0
Incoming event
12:22:22.519 AM 08/09/1994


Event 3 of 120: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
- Module or submodule assignment not evaluated or evaluation aborted with errors (SDB 1,3,5,2X,9X)
- STOP request exists
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Delayed connection repeat after time error for H CPUs
Permissibility of certain startup types:
- Manual startup not permitted, corrections in parameter assignment, submodule, etc. necessary
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Event occurred in the standby CPU in rack 0
Incoming event
12:22:22.493 AM 08/09/1994