故障检测：

Event 1 of 100: Event ID 16# 49A0
STOP caused by parameter assignment error or unpermissible difference between preset and actual configuration: startup disabled
No relevance for user (SDB no.): 5
No relevance for user (Z2): 0000 (Z3): 000f
Previous operating mode: STARTUP (warm restart)
Requested operating mode: STOP (internal)
External error, Incoming event
01:16:40.814 AM 01/28/1996


Event 2 of 100: Event ID 16# 5961
Parameter assignment error in CPU module parameters
Parameter: module type
Output address: 40 of the module with parameter assignment errors
Error type: type ID not detected ID
Operating mode: STARTUP (warm restart)
External error, Incoming event
01:16:40.727 AM 01/28/1996


Event 3 of 100: Event ID 16# 5961
Parameter assignment error in CPU module parameters
Parameter: module type
Output address: 256 of the module with parameter assignment errors
Error type: type ID not detected ID
Operating mode: STARTUP (warm restart)
External error, Incoming event
01:16:40.726 AM 01/28/1996


Event 4 of 100: Event ID 16# 4301
Mode transition from STOP to STARTUP
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered via MPI; last power on backed up
Permissibility of certain startup types:
- Manual warm restart permitted
- Automatic startup not permitted, corrections in parameter assignment, submodule, etc. necessary
Last valid operation or setting of the automatic startup type at power on:
- Warm restart triggered via MPI; last power on backed up
Previous operating mode: STOP (internal)
Requested operating mode: STARTUP (warm restart)
Incoming event
01:16:40.177 AM 01/28/1996


Event 5 of 100: Event ID 16# 5962
Parameter assignment error preventing startup in party-line parameters/communication bus parameters
Error type: I/O not ready, i.e. a module has not entered a type ID within the module monitoring time
Operating mode: STOP (internal)
External error, Incoming event
01:16:16.288 AM 01/28/1996


Event 6 of 100: Event ID 16# 5962
Parameter assignment error preventing startup in party-line parameters/communication bus parameters
Error type: I/O not ready, i.e. a module has not entered a type ID within the module monitoring time
Operating mode: STOP (internal)
External error, Incoming event
01:16:14.254 AM 01/28/1996


Event 7 of 100: Event ID 16# 5962
Parameter assignment error preventing startup in party-line parameters/communication bus parameters
Error type: I/O not ready, i.e. a module has not entered a type ID within the module monitoring time
Operating mode: STOP (internal)
External error, Incoming event
01:16:13.524 AM 01/28/1996


Event 8 of 100: Event ID 16# 5962
Parameter assignment error preventing startup in party-line parameters/communication bus parameters
Error type: I/O not ready, i.e. a module has not entered a type ID within the module monitoring time
Operating mode: STOP (internal)
External error, Incoming event
01:16:13.073 AM 01/28/1996


Event 9 of 100: Event ID 16# 49A0
STOP caused by parameter assignment error or unpermissible difference between preset and actual configuration: startup disabled
No relevance for user (SDB no.): 5
No relevance for user (Z2): 0000 (Z3): 000f
Previous operating mode: STARTUP (warm restart)
Requested operating mode: STOP (internal)
External error, Incoming event
01:05:38.141 AM 01/28/1996


Event 10 of 100: Event ID 16# 5961
Parameter assignment error in CPU module parameters
Parameter: module type
Output address: 40 of the module with parameter assignment errors
Error type: type ID not detected ID
Operating mode: STARTUP (warm restart)
External error, Incoming event
01:05:38.054 AM 01/28/1996


Event 11 of 100: Event ID 16# 5961
Parameter assignment error in CPU module parameters
Parameter: module type
Output address: 256 of the module with parameter assignment errors
Error type: type ID not detected ID
Operating mode: STARTUP (warm restart)
External error, Incoming event
01:05:38.053 AM 01/28/1996


Event 12 of 100: Event ID 16# 4301
Mode transition from STOP to STARTUP
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Automatic warm restart after backed up power on
Permissibility of certain startup types:
- Manual warm restart permitted
- Automatic warm restart permitted
Last valid operation or setting of the automatic startup type at power on:
- Automatic warm restart after backed up power on
Previous operating mode: STOP (internal)
Requested operating mode: STARTUP (warm restart)
Incoming event
01:05:37.509 AM 01/28/1996


Event 13 of 100: Event ID 16# 5962
Parameter assignment error preventing startup in party-line parameters/communication bus parameters
Error type: I/O not ready, i.e. a module has not entered a type ID within the module monitoring time
Operating mode: STOP (internal)
External error, Incoming event
01:05:37.198 AM 01/28/1996


Event 14 of 100: Event ID 16# 4959
One or more modules not ready for operation
Previous operating mode: STOP (internal)
Requested operating mode: STOP (internal)
External error, Incoming event
01:05:35.155 AM 01/28/1996


Event 15 of 100: Event ID 16# 4357
Module monitoring time started
Operating mode: STOP (internal)
Incoming event
01:04:29.711 AM 01/28/1996


Event 16 of 100: Event ID 16# 4300
Power on backed up
Previous operating mode: No voltage
Requested operating mode: STOP (own initialization)
Incoming event
01:04:28.065 AM 01/28/1996


Event 17 of 100: Event ID 16# 494E
Power failure
Previous operating mode: STOP (internal)
Requested operating mode: No voltage
External error, Incoming event
01:04:17.654 AM 01/28/1996


Event 18 of 100: Event ID 16# 49A0
STOP caused by parameter assignment error or unpermissible difference between preset and actual configuration: startup disabled
No relevance for user (SDB no.): 5
No relevance for user (Z2): 0000 (Z3): 000f
Previous operating mode: STARTUP (warm restart)
Requested operating mode: STOP (internal)
External error, Incoming event
12:44:36.412 AM 01/28/1996


Event 19 of 100: Event ID 16# 5961
Parameter assignment error in CPU module parameters
Parameter: module type
Output address: 40 of the module with parameter assignment errors
Error type: type ID not detected ID
Operating mode: STARTUP (warm restart)
External error, Incoming event
12:44:36.325 AM 01/28/1996


Event 20 of 100: Event ID 16# 5961
Parameter assignment error in CPU module parameters
Parameter: module type
Output address: 256 of the module with parameter assignment errors
Error type: type ID not detected ID
Operating mode: STARTUP (warm restart)



如何解除故障？？？？？？？？