最近项目中发现 CPU 414-4 H的DP口损坏不知道什么原因！在DP口的输入输出端 都加了总线中继器啊！
大家帮忙分析一下！


一下是诊断信息！
Diagnostic buffer of module CPU 414-4 H

Order No./ Des cription Component Version
6ES7 414-4HM14-0AB0 Hardware 1
- - - Firmware V 4.5.2

Rack: 1
Slot: 3


Event 1 of 120: Event ID 16# 5371
Distributed I/Os: end of the synchronization with a DP master
Slot of the DP master: 3 in rack 1
Number of distributed stations: 0
Event occurred in the standby CPU in rack 1
Incoming event
04:08:53.372 AM 02/03/1995


Event 2 of 120: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
- STOP request exists
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered by switch setting
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Event occurred in the standby CPU in rack 1
Incoming event
04:07:48.281 AM 02/03/1995


Event 3 of 120: Event ID 16# 4300
Power on backed up
Initialization information: Initialization after power on (backed up CPU)
Previous operating mode: No voltage
Requested operating mode: STOP (own initialization)
Event occurred in the standby CPU in rack 1
Incoming event
04:07:44.445 AM 02/03/1995


Event 4 of 120: Event ID 16# 494E
Power failure
Previous operating mode: STOP (internal)
Requested operating mode: No voltage
Event occurred in the standby CPU in rack 1
External error, Incoming event
04:07:11.440 AM 02/03/1995


Event 5 of 120: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
- STOP request exists
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered by switch setting
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Event occurred in the standby CPU in rack 1
Incoming event
04:07:06.870 AM 02/03/1995


Event 6 of 120: Event ID 16# 4300
Power on backed up
Initialization information: Initialization after power on (backed up CPU)
Previous operating mode: No voltage
Requested operating mode: STOP (own initialization)
Event occurred in the standby CPU in rack 1
Incoming event
04:07:03.912 AM 02/03/1995


Event 7 of 120: Event ID 16# 494E
Power failure
Previous operating mode: STOP (internal)
Requested operating mode: No voltage
Event occurred in the standby CPU in rack 1
External error, Incoming event
04:06:58.907 AM 02/03/1995


Event 8 of 120: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
- STOP request exists
- Keyswitch set to STOP
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered by switch setting
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Event occurred in the standby CPU in rack 1
Incoming event
04:06:46.520 AM 02/03/1995


Event 9 of 120: Event ID 16# 4303
STOP caused by stop switch being activated
Previous operating mode: STOP (internal)
Requested operating mode: STOP (internal)
Event occurred in the standby CPU in rack 1
Incoming event
04:06:46.106 AM 02/03/1995


Event 10 of 120: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
- STOP request exists
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered by switch setting
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Event occurred in the standby CPU in rack 1
Incoming event
04:06:45.563 AM 02/03/1995


Event 11 of 120: Event ID 16# 43F1
Switchover of master CPU and standby CPU
Previous operating mode: STOP (own initialization)
Requested operating mode: STOP (own initialization)
Event occurred in the standby CPU in rack 1
Incoming event
04:06:42.885 AM 02/03/1995


Event 12 of 120: Event ID 16# 4300
Power on backed up
Initialization information: Initialization after power on (backed up CPU)
Previous operating mode: No voltage
Requested operating mode: STOP (own initialization)
Event occurred in the master CPU in rack 1
Incoming event
04:06:42.294 AM 02/03/1995


Event 13 of 120: Event ID 16# 494E
Power failure
Previous operating mode: STOP (internal)
Requested operating mode: No voltage
Event occurred in the master CPU in rack 1
External error, Incoming event
04:06:07.289 AM 02/03/1995


Event 14 of 120: Event ID 16# 4303
STOP caused by stop switch being activated
Previous operating mode: STOP (internal)
Requested operating mode: STOP (internal)
Event occurred in the master CPU in rack 1
Incoming event
04:06:06.585 AM 02/03/1995


Event 15 of 120: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
- STOP request exists
- Keyswitch set to STOP
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered by switch setting
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Event occurred in the master CPU in rack 1
Incoming event
04:05:39.548 AM 02/03/1995


Event 16 of 120: Event ID 16# 4303
STOP caused by stop switch being activated
Previous operating mode: STOP (internal)
Requested operating mode: STOP (internal)
Event occurred in the master CPU in rack 1
Incoming event
04:05:39.208 AM 02/03/1995


Event 17 of 120: Event ID 16# 43F1
Switchover of master CPU and standby CPU
Previous operating mode: STOP (internal)
Requested operating mode: STOP (internal)
Event occurred in the master CPU in rack 1
Incoming event
04:05:22.735 AM 02/03/1995


Event 18 of 120: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
- STOP request exists
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered by switch setting
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Event occurred in the standby CPU in rack 1
Incoming event
04:05:17.264 AM 02/03/1995


Event 19 of 120: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
- Module or submodule assignment not evaluated or evaluation aborted with errors (SDB 1,3,5,2X,9X)
- STOP request exists
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered by switch setting
Permissibility of certain startup types:
- Manual startup not permitted, corrections in parameter assignment, submodule, etc. necessary
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Event occurred in the standby CPU in rack 1
Incoming event
04:05:17.237 AM 02/03/1995


Event 20 of 120: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
Loading user program or internal inconsistency detected
(SDBs less than 200 incomplete, superfluous, or incorrect)
- Module or submodule assignment not evaluated or evaluation aborted with errors (SDB 1,3,5,2X,9X)
- STOP request exists
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered by switch setting
Permissibility of certain startup types:
- Manual startup not permitted, corrections in parameter assignment, submodule, etc. necessary
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Event occurred in the standby CPU in rack 1
Incoming event
04:05:16.412 AM 02/03/1995


Event 21 of 120: Event ID 16# 4302
Mode transition from STARTUP to RUN
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered by switch setting
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- Warm restart triggered by switch setting
Previous operating mode: STARTUP (warm restart)
Requested operating mode: RUN
Event occurred in the master CPU in rack 0
Incoming event
04:05:13.263 AM 02/03/1995


Event 22 of 120: Event ID 16# 4301
Mode transition from STOP to STARTUP
STOP due to: STOP caused by stop switch being activated
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered by switch setting
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of the automatic startup type at power on:
- Warm restart triggered by switch setting
Previous operating mode: STOP (internal)
Requested operating mode: STARTUP (warm restart)
Event occurred in the master CPU in rack 0
Incoming event
04:05:12.176 AM 02/03/1995


Event 23 of 120: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
- STOP request exists
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered by switch setting
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Event occurred in the standby CPU in rack 1
Incoming event
04:05:11.718 AM 02/03/1995


Event 24 of 120: Event ID 16# 43D2
Standby CPU in STOP mode because the master CPU went into STOP mode during link-up
Trigger event in the master CPU: STOP caused by stop switch being activated
Previous operating mode: LINK-UP
Requested operating mode: STOP (internal)
Event occurred in the standby CPU in rack 1
Incoming event
04:05:11.713 AM 02/03/1995


Event 25 of 120: Event ID 16# 4303
STOP caused by stop switch being activated
Previous operating mode: LINK-UP
Requested operating mode: STOP (internal)
Event occurred in the master CPU in rack 0
Incoming event
04:05:11.714 AM 02/03/1995


Event 26 of 120: Event ID 16# 43E0
Change from STOP (internal) to link-up mode
STOP due to: STOP caused by stop switch being activated
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered by switch setting
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of the automatic startup type at power on:
- Warm restart triggered by switch setting
Previous operating mode: STOP (internal)
Requested operating mode: LINK-UP
Event occurred in the standby CPU in rack 1
Incoming event
04:04:39.455 AM 02/03/1995


Event 27 of 120: Event ID 16# 43E0
Change from RUN to link-up mode
Previous operating mode: RUN
Requested operating mode: LINK-UP
Event occurred in the master CPU in rack 0
Incoming event
04:04:39.455 AM 02/03/1995


Event 28 of 120: Event ID 16# 43E0
Change from STOP (internal) to link-up mode
STOP due to: STOP caused by stop switch being activated
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Warm restart triggered by switch setting
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of the automatic startup type at power on:
- Warm restart triggered by switch setting
Previous operating mode: STOP (internal)
Requested operating mode: STOP (internal)
Event occurred in the standby CPU in rack 1
Incoming event
04:04:39.412 AM 02/03/1995


Event 29 of 120: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Delayed connection repeat after time error for H CPUs
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- Warm restart triggered by switch setting
Operating mode: STOP (internal)
Event occurred in the standby CPU in rack 1
Incoming event
04:04:39.412 AM 02/03/1995


Event 30 of 120: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
- STOP request exists
- Keyswitch set to STOP
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Delayed connection repeat after time error for H CPUs
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Event occurred in the standby CPU in rack 1
Incoming event
04:04:39.412 AM 02/03/1995


Event 31 of 120: Event ID 16# 4303
STOP caused by stop switch being activated
Previous operating mode: STOP (internal)
Requested operating mode: STOP (internal)
Event occurred in the standby CPU in rack 1
Incoming event
04:04:39.099 AM 02/03/1995


Event 32 of 120: Event ID 16# 5371
Distributed I/Os: end of the synchronization with a DP master
Slot of the DP master: 3 in rack 1
Number of distributed stations: 0
Event occurred in the standby CPU in rack 1
Incoming event
03:58:52.288 AM 02/03/1995


Event 33 of 120: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
- STOP request exists
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Delayed connection repeat after time error for H CPUs
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Event occurred in the standby CPU in rack 1
Incoming event
03:57:47.212 AM 02/03/1995


Event 34 of 120: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
- Module or submodule assignment not evaluated or evaluation aborted with errors (SDB 1,3,5,2X,9X)
- STOP request exists
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Delayed connection repeat after time error for H CPUs
Permissibility of certain startup types:
- Manual startup not permitted, corrections in parameter assignment, submodule, etc. necessary
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Event occurred in the standby CPU in rack 1
Incoming event
03:57:47.184 AM 02/03/1995


Event 35 of 120: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
Loading user program or internal inconsistency detected
(SDBs less than 200 incomplete, superfluous, or incorrect)
- Module or submodule assignment not evaluated or evaluation aborted with errors (SDB 1,3,5,2X,9X)
- STOP request exists
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Delayed connection repeat after time error for H CPUs
Permissibility of certain startup types:
- Manual startup not permitted, corrections in parameter assignment, submodule, etc. necessary
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Event occurred in the standby CPU in rack 1
Incoming event
03:57:46.418 AM 02/03/1995


Event 36 of 120: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
Loading user program or internal inconsistency detected
(SDBs less than 200 incomplete, superfluous, or incorrect)
- STOP request exists
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Delayed connection repeat after time error for H CPUs
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Event occurred in the standby CPU in rack 1
Incoming event
03:57:46.398 AM 02/03/1995


Event 37 of 120: Event ID 16# 530D
New startup information in STOP mode
Startup prevented by:
- STOP request exists
- Cold restart or warm restart necessary
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Delayed connection repeat after time error for H CPUs
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of automatic startup type at power on:
- No startup type/following memory reset
Operating mode: STOP (internal)
Event occurred in the standby CPU in rack 1
Incoming event
03:57:22.894 AM 02/03/1995


Event 38 of 120: Event ID 16# 43DF
Final update abort due to timeout the max. lock time for priority classes > 15 after 10 - update attempts, new update attempt necessary
Previous operating mode: UPDATE
Requested operating mode: STOP (internal)
Event occurred in the standby CPU in rack 1
Incoming event
03:57:22.887 AM 02/03/1995


Event 39 of 120: Event ID 16# 43DF
Final update abort due to timeout the max. lock time for priority classes > 15 after 10 - update attempts, new update attempt necessary
Previous operating mode: UPDATE
Requested operating mode: RUN
Event occurred in the master CPU in rack 0
Incoming event
03:57:22.887 AM 02/03/1995


Event 40 of 120: Event ID 16# 43E9
Standby CPU: Change from startup mode to update mode
Previous operating mode: STARTUP (warm restart)
Requested operating mode: UPDATE
Event occurred in the standby CPU in rack 1
Incoming event
03:57:22.355 AM 02/03/1995


Event 41 of 120: Event ID 16# 43E1
Change from link-up mode to update mode
Previous operating mode: LINK-UP
Requested operating mode: UPDATE
Event occurred in the master CPU in rack 0
Incoming event
03:57:22.355 AM 02/03/1995


Event 42 of 120: Event ID 16# 43E8
Standby CPU: Change from link-up mode to startup mode
STOP due to: Update abort due to timeout an indeterminable monitoring time during 222. Attempt, new update attempt initiated
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Delayed connection repeat after time error for H CPUs
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of the automatic startup type at power on:
- Delayed connection repeat after time error for H CPUs
Previous operating mode: LINK-UP
Requested operating mode: STARTUP (warm restart)
Event occurred in the standby CPU in rack 1
Incoming event
03:57:21.843 AM 02/03/1995


Event 43 of 120: Event ID 16# 5371
Distributed I/Os: end of the synchronization with a DP master
Slot of the DP master: 3 in rack 1
Number of distributed stations: 0
Event occurred in the standby CPU in rack 1
Incoming event
03:57:21.822 AM 02/03/1995


Event 44 of 120: Event ID 16# 43E0
Change from STOP (internal) to link-up mode
STOP due to: Update abort due to timeout an indeterminable monitoring time during 222. Attempt, new update attempt initiated
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Delayed connection repeat after time error for H CPUs
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of the automatic startup type at power on:
- Delayed connection repeat after time error for H CPUs
Previous operating mode: STOP (internal)
Requested operating mode: LINK-UP
Event occurred in the standby CPU in rack 1
Incoming event
03:56:10.338 AM 02/03/1995


Event 45 of 120: Event ID 16# 43E0
Change from RUN to link-up mode
Previous operating mode: RUN
Requested operating mode: LINK-UP
Event occurred in the master CPU in rack 0
Incoming event
03:56:10.337 AM 02/03/1995


Event 46 of 120: Event ID 16# 43DE
Update abort due to timeout the max. lock time for priority classes > 15 during 9. Attempt, new update attempt initiated
Previous operating mode: UPDATE
Requested operating mode: STOP (internal)
Event occurred in the standby CPU in rack 1
Incoming event
03:54:40.812 AM 02/03/1995


Event 47 of 120: Event ID 16# 73C2
Update abort due to timeout the max. lock time for priority classes > 15 during 9. attempt
Trigger event: Update abort due to timeout the max. lock time for priority classes > 15 during 9. Attempt, new update attempt initiated
occurred in: Master CPU in rack 0
Requested OB: CPU redundancy error OB (OB72)
Priority class: 28
Incoming event
03:54:40.811 AM 02/03/1995


Event 48 of 120: Event ID 16# 43DE
Update abort due to timeout the max. lock time for priority classes > 15 during 9. Attempt, new update attempt initiated
Previous operating mode: UPDATE
Requested operating mode: RUN
Event occurred in the master CPU in rack 0
Incoming event
03:54:40.811 AM 02/03/1995


Event 49 of 120: Event ID 16# 43E9
Standby CPU: Change from startup mode to update mode
Previous operating mode: STARTUP (warm restart)
Requested operating mode: UPDATE
Event occurred in the standby CPU in rack 1
Incoming event
03:54:40.376 AM 02/03/1995


Event 50 of 120: Event ID 16# 43E1
Change from link-up mode to update mode
Previous operating mode: LINK-UP
Requested operating mode: UPDATE
Event occurred in the master CPU in rack 0
Incoming event
03:54:40.376 AM 02/03/1995


Event 51 of 120: Event ID 16# 43E8
Standby CPU: Change from link-up mode to startup mode
STOP due to: Update abort due to timeout an indeterminable monitoring time during 222. Attempt, new update attempt initiated
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Delayed connection repeat after time error for H CPUs
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of the automatic startup type at power on:
- Delayed connection repeat after time error for H CPUs
Previous operating mode: LINK-UP
Requested operating mode: STARTUP (warm restart)
Event occurred in the standby CPU in rack 1
Incoming event
03:54:39.864 AM 02/03/1995


Event 52 of 120: Event ID 16# 5371
Distributed I/Os: end of the synchronization with a DP master
Slot of the DP master: 3 in rack 1
Number of distributed stations: 0
Event occurred in the standby CPU in rack 1
Incoming event
03:54:39.844 AM 02/03/1995


Event 53 of 120: Event ID 16# 43E0
Change from STOP (internal) to link-up mode
STOP due to: Update abort due to timeout an indeterminable monitoring time during 222. Attempt, new update attempt initiated
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Delayed connection repeat after time error for H CPUs
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of the automatic startup type at power on:
- Delayed connection repeat after time error for H CPUs
Previous operating mode: STOP (internal)
Requested operating mode: LINK-UP
Event occurred in the standby CPU in rack 1
Incoming event
03:53:28.347 AM 02/03/1995


Event 54 of 120: Event ID 16# 43E0
Change from RUN to link-up mode
Previous operating mode: RUN
Requested operating mode: LINK-UP
Event occurred in the master CPU in rack 0
Incoming event
03:53:28.346 AM 02/03/1995


Event 55 of 120: Event ID 16# 43DE
Update abort due to timeout the max. lock time for priority classes > 15 during 8. Attempt, new update attempt initiated
Previous operating mode: UPDATE
Requested operating mode: STOP (internal)
Event occurred in the standby CPU in rack 1
Incoming event
03:51:58.783 AM 02/03/1995


Event 56 of 120: Event ID 16# 73C2
Update abort due to timeout the max. lock time for priority classes > 15 during 8. attempt
Trigger event: Update abort due to timeout the max. lock time for priority classes > 15 during 8. Attempt, new update attempt initiated
occurred in: Master CPU in rack 0
Requested OB: CPU redundancy error OB (OB72)
Priority class: 28
Incoming event
03:51:58.782 AM 02/03/1995


Event 57 of 120: Event ID 16# 43DE
Update abort due to timeout the max. lock time for priority classes > 15 during 8. Attempt, new update attempt initiated
Previous operating mode: UPDATE
Requested operating mode: RUN
Event occurred in the master CPU in rack 0
Incoming event
03:51:58.782 AM 02/03/1995


Event 58 of 120: Event ID 16# 43E9
Standby CPU: Change from startup mode to update mode
Previous operating mode: STARTUP (warm restart)
Requested operating mode: UPDATE
Event occurred in the standby CPU in rack 1
Incoming event
03:51:58.359 AM 02/03/1995


Event 59 of 120: Event ID 16# 43E1
Change from link-up mode to update mode
Previous operating mode: LINK-UP
Requested operating mode: UPDATE
Event occurred in the master CPU in rack 0
Incoming event
03:51:58.359 AM 02/03/1995


Event 60 of 120: Event ID 16# 43E8
Standby CPU: Change from link-up mode to startup mode
STOP due to: Update abort due to timeout an indeterminable monitoring time during 222. Attempt, new update attempt initiated
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Delayed connection repeat after time error for H CPUs
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of the automatic startup type at power on:
- Delayed connection repeat after time error for H CPUs
Previous operating mode: LINK-UP
Requested operating mode: STARTUP (warm restart)
Event occurred in the standby CPU in rack 1
Incoming event
03:51:57.857 AM 02/03/1995


Event 61 of 120: Event ID 16# 5371
Distributed I/Os: end of the synchronization with a DP master
Slot of the DP master: 3 in rack 1
Number of distributed stations: 0
Event occurred in the standby CPU in rack 1
Incoming event
03:51:57.836 AM 02/03/1995


Event 62 of 120: Event ID 16# 43E0
Change from STOP (internal) to link-up mode
STOP due to: Update abort due to timeout an indeterminable monitoring time during 222. Attempt, new update attempt initiated
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Delayed connection repeat after time error for H CPUs
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of the automatic startup type at power on:
- Delayed connection repeat after time error for H CPUs
Previous operating mode: STOP (internal)
Requested operating mode: LINK-UP
Event occurred in the standby CPU in rack 1
Incoming event
03:50:46.443 AM 02/03/1995


Event 63 of 120: Event ID 16# 43E0
Change from RUN to link-up mode
Previous operating mode: RUN
Requested operating mode: LINK-UP
Event occurred in the master CPU in rack 0
Incoming event
03:50:46.442 AM 02/03/1995


Event 64 of 120: Event ID 16# 43DE
Update abort due to timeout the max. lock time for priority classes > 15 during 7. Attempt, new update attempt initiated
Previous operating mode: UPDATE
Requested operating mode: STOP (internal)
Event occurred in the standby CPU in rack 1
Incoming event
03:49:16.799 AM 02/03/1995


Event 65 of 120: Event ID 16# 73C2
Update abort due to timeout the max. lock time for priority classes > 15 during 7. attempt
Trigger event: Update abort due to timeout the max. lock time for priority classes > 15 during 7. Attempt, new update attempt initiated
occurred in: Master CPU in rack 0
Requested OB: CPU redundancy error OB (OB72)
Priority class: 28
Incoming event
03:49:16.798 AM 02/03/1995


Event 66 of 120: Event ID 16# 43DE
Update abort due to timeout the max. lock time for priority classes > 15 during 7. Attempt, new update attempt initiated
Previous operating mode: UPDATE
Requested operating mode: RUN
Event occurred in the master CPU in rack 0
Incoming event
03:49:16.798 AM 02/03/1995


Event 67 of 120: Event ID 16# 43E9
Standby CPU: Change from startup mode to update mode
Previous operating mode: STARTUP (warm restart)
Requested operating mode: UPDATE
Event occurred in the standby CPU in rack 1
Incoming event
03:49:16.351 AM 02/03/1995


Event 68 of 120: Event ID 16# 43E1
Change from link-up mode to update mode
Previous operating mode: LINK-UP
Requested operating mode: UPDATE
Event occurred in the master CPU in rack 0
Incoming event
03:49:16.351 AM 02/03/1995


Event 69 of 120: Event ID 16# 43E8
Standby CPU: Change from link-up mode to startup mode
STOP due to: Update abort due to timeout an indeterminable monitoring time during 222. Attempt, new update attempt initiated
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Delayed connection repeat after time error for H CPUs
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of the automatic startup type at power on:
- Delayed connection repeat after time error for H CPUs
Previous operating mode: LINK-UP
Requested operating mode: STARTUP (warm restart)
Event occurred in the standby CPU in rack 1
Incoming event
03:49:15.875 AM 02/03/1995


Event 70 of 120: Event ID 16# 5371
Distributed I/Os: end of the synchronization with a DP master
Slot of the DP master: 3 in rack 1
Number of distributed stations: 0
Event occurred in the standby CPU in rack 1
Incoming event
03:49:15.854 AM 02/03/1995


Event 71 of 120: Event ID 16# 43E0
Change from STOP (internal) to link-up mode
STOP due to: Update abort due to timeout an indeterminable monitoring time during 222. Attempt, new update attempt initiated
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Delayed connection repeat after time error for H CPUs
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of the automatic startup type at power on:
- Delayed connection repeat after time error for H CPUs
Previous operating mode: STOP (internal)
Requested operating mode: LINK-UP
Event occurred in the standby CPU in rack 1
Incoming event
03:48:04.437 AM 02/03/1995


Event 72 of 120: Event ID 16# 43E0
Change from RUN to link-up mode
Previous operating mode: RUN
Requested operating mode: LINK-UP
Event occurred in the master CPU in rack 0
Incoming event
03:48:04.437 AM 02/03/1995


Event 73 of 120: Event ID 16# 43DE
Update abort due to timeout the max. lock time for priority classes > 15 during 6. Attempt, new update attempt initiated
Previous operating mode: UPDATE
Requested operating mode: STOP (internal)
Event occurred in the standby CPU in rack 1
Incoming event
03:46:34.763 AM 02/03/1995


Event 74 of 120: Event ID 16# 73C2
Update abort due to timeout the max. lock time for priority classes > 15 during 6. attempt
Trigger event: Update abort due to timeout the max. lock time for priority classes > 15 during 6. Attempt, new update attempt initiated
occurred in: Master CPU in rack 0
Requested OB: CPU redundancy error OB (OB72)
Priority class: 28
Incoming event
03:46:34.762 AM 02/03/1995


Event 75 of 120: Event ID 16# 43DE
Update abort due to timeout the max. lock time for priority classes > 15 during 6. Attempt, new update attempt initiated
Previous operating mode: UPDATE
Requested operating mode: RUN
Event occurred in the master CPU in rack 0
Incoming event
03:46:34.762 AM 02/03/1995


Event 76 of 120: Event ID 16# 43E9
Standby CPU: Change from startup mode to update mode
Previous operating mode: STARTUP (warm restart)
Requested operating mode: UPDATE
Event occurred in the standby CPU in rack 1
Incoming event
03:46:34.355 AM 02/03/1995


Event 77 of 120: Event ID 16# 43E1
Change from link-up mode to update mode
Previous operating mode: LINK-UP
Requested operating mode: UPDATE
Event occurred in the master CPU in rack 0
Incoming event
03:46:34.355 AM 02/03/1995


Event 78 of 120: Event ID 16# 43E8
Standby CPU: Change from link-up mode to startup mode
STOP due to: Update abort due to timeout an indeterminable monitoring time during 222. Attempt, new update attempt initiated
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Delayed connection repeat after time error for H CPUs
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of the automatic startup type at power on:
- Delayed connection repeat after time error for H CPUs
Previous operating mode: LINK-UP
Requested operating mode: STARTUP (warm restart)
Event occurred in the standby CPU in rack 1
Incoming event
03:46:33.864 AM 02/03/1995


Event 79 of 120: Event ID 16# 5371
Distributed I/Os: end of the synchronization with a DP master
Slot of the DP master: 3 in rack 1
Number of distributed stations: 0
Event occurred in the standby CPU in rack 1
Incoming event
03:46:33.844 AM 02/03/1995


Event 80 of 120: Event ID 16# 43E0
Change from STOP (internal) to link-up mode
STOP due to: Update abort due to timeout an indeterminable monitoring time during 222. Attempt, new update attempt initiated
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Delayed connection repeat after time error for H CPUs
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of the automatic startup type at power on:
- Delayed connection repeat after time error for H CPUs
Previous operating mode: STOP (internal)
Requested operating mode: LINK-UP
Event occurred in the standby CPU in rack 1
Incoming event
03:45:22.444 AM 02/03/1995


Event 81 of 120: Event ID 16# 43E0
Change from RUN to link-up mode
Previous operating mode: RUN
Requested operating mode: LINK-UP
Event occurred in the master CPU in rack 0
Incoming event
03:45:22.443 AM 02/03/1995


Event 82 of 120: Event ID 16# 43DE
Update abort due to timeout the max. lock time for priority classes > 15 during 5. Attempt, new update attempt initiated
Previous operating mode: UPDATE
Requested operating mode: STOP (internal)
Event occurred in the standby CPU in rack 1
Incoming event
03:43:52.770 AM 02/03/1995


Event 83 of 120: Event ID 16# 73C2
Update abort due to timeout the max. lock time for priority classes > 15 during 5. attempt
Trigger event: Update abort due to timeout the max. lock time for priority classes > 15 during 5. Attempt, new update attempt initiated
occurred in: Master CPU in rack 0
Requested OB: CPU redundancy error OB (OB72)
Priority class: 28
Incoming event
03:43:52.769 AM 02/03/1995


Event 84 of 120: Event ID 16# 43DE
Update abort due to timeout the max. lock time for priority classes > 15 during 5. Attempt, new update attempt initiated
Previous operating mode: UPDATE
Requested operating mode: RUN
Event occurred in the master CPU in rack 0
Incoming event
03:43:52.769 AM 02/03/1995


Event 85 of 120: Event ID 16# 43E9
Standby CPU: Change from startup mode to update mode
Previous operating mode: STARTUP (warm restart)
Requested operating mode: UPDATE
Event occurred in the standby CPU in rack 1
Incoming event
03:43:52.353 AM 02/03/1995


Event 86 of 120: Event ID 16# 43E1
Change from link-up mode to update mode
Previous operating mode: LINK-UP
Requested operating mode: UPDATE
Event occurred in the master CPU in rack 0
Incoming event
03:43:52.353 AM 02/03/1995


Event 87 of 120: Event ID 16# 43E8
Standby CPU: Change from link-up mode to startup mode
STOP due to: Update abort due to timeout an indeterminable monitoring time during 222. Attempt, new update attempt initiated
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Delayed connection repeat after time error for H CPUs
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of the automatic startup type at power on:
- Delayed connection repeat after time error for H CPUs
Previous operating mode: LINK-UP
Requested operating mode: STARTUP (warm restart)
Event occurred in the standby CPU in rack 1
Incoming event
03:43:51.868 AM 02/03/1995


Event 88 of 120: Event ID 16# 5371
Distributed I/Os: end of the synchronization with a DP master
Slot of the DP master: 3 in rack 1
Number of distributed stations: 0
Event occurred in the standby CPU in rack 1
Incoming event
03:43:51.848 AM 02/03/1995


Event 89 of 120: Event ID 16# 43E0
Change from STOP (internal) to link-up mode
STOP due to: Update abort due to timeout an indeterminable monitoring time during 222. Attempt, new update attempt initiated
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Delayed connection repeat after time error for H CPUs
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of the automatic startup type at power on:
- Delayed connection repeat after time error for H CPUs
Previous operating mode: STOP (internal)
Requested operating mode: LINK-UP
Event occurred in the standby CPU in rack 1
Incoming event
03:42:40.454 AM 02/03/1995


Event 90 of 120: Event ID 16# 43E0
Change from RUN to link-up mode
Previous operating mode: RUN
Requested operating mode: LINK-UP
Event occurred in the master CPU in rack 0
Incoming event
03:42:40.453 AM 02/03/1995


Event 91 of 120: Event ID 16# 43DE
Update abort due to timeout the max. lock time for priority classes > 15 during 4. Attempt, new update attempt initiated
Previous operating mode: UPDATE
Requested operating mode: STOP (internal)
Event occurred in the standby CPU in rack 1
Incoming event
03:41:10.813 AM 02/03/1995


Event 92 of 120: Event ID 16# 73C2
Update abort due to timeout the max. lock time for priority classes > 15 during 4. attempt
Trigger event: Update abort due to timeout the max. lock time for priority classes > 15 during 4. Attempt, new update attempt initiated
occurred in: Master CPU in rack 0
Requested OB: CPU redundancy error OB (OB72)
Priority class: 28
Incoming event
03:41:10.812 AM 02/03/1995


Event 93 of 120: Event ID 16# 43DE
Update abort due to timeout the max. lock time for priority classes > 15 during 4. Attempt, new update attempt initiated
Previous operating mode: UPDATE
Requested operating mode: RUN
Event occurred in the master CPU in rack 0
Incoming event
03:41:10.812 AM 02/03/1995


Event 94 of 120: Event ID 16# 43E9
Standby CPU: Change from startup mode to update mode
Previous operating mode: STARTUP (warm restart)
Requested operating mode: UPDATE
Event occurred in the standby CPU in rack 1
Incoming event
03:41:10.335 AM 02/03/1995


Event 95 of 120: Event ID 16# 43E1
Change from link-up mode to update mode
Previous operating mode: LINK-UP
Requested operating mode: UPDATE
Event occurred in the master CPU in rack 0
Incoming event
03:41:10.335 AM 02/03/1995


Event 96 of 120: Event ID 16# 43E8
Standby CPU: Change from link-up mode to startup mode
STOP due to: Update abort due to timeout an indeterminable monitoring time during 222. Attempt, new update attempt initiated
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Delayed connection repeat after time error for H CPUs
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of the automatic startup type at power on:
- Delayed connection repeat after time error for H CPUs
Previous operating mode: LINK-UP
Requested operating mode: STARTUP (warm restart)
Event occurred in the standby CPU in rack 1
Incoming event
03:41:09.865 AM 02/03/1995


Event 97 of 120: Event ID 16# 5371
Distributed I/Os: end of the synchronization with a DP master
Slot of the DP master: 3 in rack 1
Number of distributed stations: 0
Event occurred in the standby CPU in rack 1
Incoming event
03:41:09.838 AM 02/03/1995


Event 98 of 120: Event ID 16# 43E0
Change from STOP (internal) to link-up mode
STOP due to: Update abort due to timeout an indeterminable monitoring time during 222. Attempt, new update attempt initiated
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Delayed connection repeat after time error for H CPUs
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of the automatic startup type at power on:
- Delayed connection repeat after time error for H CPUs
Previous operating mode: STOP (internal)
Requested operating mode: LINK-UP
Event occurred in the standby CPU in rack 1
Incoming event
03:39:58.388 AM 02/03/1995


Event 99 of 120: Event ID 16# 43E0
Change from RUN to link-up mode
Previous operating mode: RUN
Requested operating mode: LINK-UP
Event occurred in the master CPU in rack 0
Incoming event
03:39:58.388 AM 02/03/1995


Event 100 of 120: Event ID 16# 43DE
Update abort due to timeout the max. lock time for priority classes > 15 during 3. Attempt, new update attempt initiated
Previous operating mode: UPDATE
Requested operating mode: STOP (internal)
Event occurred in the standby CPU in rack 1
Incoming event
03:38:28.838 AM 02/03/1995


Event 101 of 120: Event ID 16# 73C2
Update abort due to timeout the max. lock time for priority classes > 15 during 3. attempt
Trigger event: Update abort due to timeout the max. lock time for priority classes > 15 during 3. Attempt, new update attempt initiated
occurred in: Master CPU in rack 0
Requested OB: CPU redundancy error OB (OB72)
Priority class: 28
Incoming event
03:38:28.837 AM 02/03/1995


Event 102 of 120: Event ID 16# 43DE
Update abort due to timeout the max. lock time for priority classes > 15 during 3. Attempt, new update attempt initiated
Previous operating mode: UPDATE
Requested operating mode: RUN
Event occurred in the master CPU in rack 0
Incoming event
03:38:28.837 AM 02/03/1995


Event 103 of 120: Event ID 16# 43E9
Standby CPU: Change from startup mode to update mode
Previous operating mode: STARTUP (warm restart)
Requested operating mode: UPDATE
Event occurred in the standby CPU in rack 1
Incoming event
03:38:28.347 AM 02/03/1995


Event 104 of 120: Event ID 16# 43E1
Change from link-up mode to update mode
Previous operating mode: LINK-UP
Requested operating mode: UPDATE
Event occurred in the master CPU in rack 0
Incoming event
03:38:28.347 AM 02/03/1995


Event 105 of 120: Event ID 16# 43E8
Standby CPU: Change from link-up mode to startup mode
STOP due to: Update abort due to timeout an indeterminable monitoring time during 222. Attempt, new update attempt initiated
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Delayed connection repeat after time error for H CPUs
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of the automatic startup type at power on:
- Delayed connection repeat after time error for H CPUs
Previous operating mode: LINK-UP
Requested operating mode: STARTUP (warm restart)
Event occurred in the standby CPU in rack 1
Incoming event
03:38:27.866 AM 02/03/1995


Event 106 of 120: Event ID 16# 5371
Distributed I/Os: end of the synchronization with a DP master
Slot of the DP master: 3 in rack 1
Number of distributed stations: 0
Event occurred in the standby CPU in rack 1
Incoming event
03:38:27.846 AM 02/03/1995


Event 107 of 120: Event ID 16# 43E0
Change from STOP (internal) to link-up mode
STOP due to: Update abort due to timeout an indeterminable monitoring time during 222. Attempt, new update attempt initiated
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Delayed connection repeat after time error for H CPUs
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of the automatic startup type at power on:
- Delayed connection repeat after time error for H CPUs
Previous operating mode: STOP (internal)
Requested operating mode: LINK-UP
Event occurred in the standby CPU in rack 1
Incoming event
03:37:16.378 AM 02/03/1995


Event 108 of 120: Event ID 16# 43E0
Change from RUN to link-up mode
Previous operating mode: RUN
Requested operating mode: LINK-UP
Event occurred in the master CPU in rack 0
Incoming event
03:37:16.377 AM 02/03/1995


Event 109 of 120: Event ID 16# 43DE
Update abort due to timeout the max. lock time for priority classes > 15 during 2. Attempt, new update attempt initiated
Previous operating mode: UPDATE
Requested operating mode: STOP (internal)
Event occurred in the standby CPU in rack 1
Incoming event
03:35:46.825 AM 02/03/1995


Event 110 of 120: Event ID 16# 73C2
Update abort due to timeout the max. lock time for priority classes > 15 during 2. attempt
Trigger event: Update abort due to timeout the max. lock time for priority classes > 15 during 2. Attempt, new update attempt initiated
occurred in: Master CPU in rack 0
Requested OB: CPU redundancy error OB (OB72)
Priority class: 28
Incoming event
03:35:46.824 AM 02/03/1995


Event 111 of 120: Event ID 16# 43DE
Update abort due to timeout the max. lock time for priority classes > 15 during 2. Attempt, new update attempt initiated
Previous operating mode: UPDATE
Requested operating mode: RUN
Event occurred in the master CPU in rack 0
Incoming event
03:35:46.824 AM 02/03/1995


Event 112 of 120: Event ID 16# 43E9
Standby CPU: Change from startup mode to update mode
Previous operating mode: STARTUP (warm restart)
Requested operating mode: UPDATE
Event occurred in the standby CPU in rack 1
Incoming event
03:35:46.365 AM 02/03/1995


Event 113 of 120: Event ID 16# 43E1
Change from link-up mode to update mode
Previous operating mode: LINK-UP
Requested operating mode: UPDATE
Event occurred in the master CPU in rack 0
Incoming event
03:35:46.365 AM 02/03/1995


Event 114 of 120: Event ID 16# 43E8
Standby CPU: Change from link-up mode to startup mode
STOP due to: Update abort due to timeout an indeterminable monitoring time during 222. Attempt, new update attempt initiated
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Delayed connection repeat after time error for H CPUs
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of the automatic startup type at power on:
- Delayed connection repeat after time error for H CPUs
Previous operating mode: LINK-UP
Requested operating mode: STARTUP (warm restart)
Event occurred in the standby CPU in rack 1
Incoming event
03:35:45.885 AM 02/03/1995


Event 115 of 120: Event ID 16# 5371
Distributed I/Os: end of the synchronization with a DP master
Slot of the DP master: 3 in rack 1
Number of distributed stations: 0
Event occurred in the standby CPU in rack 1
Incoming event
03:35:45.865 AM 02/03/1995


Event 116 of 120: Event ID 16# 43E0
Change from STOP (internal) to link-up mode
STOP due to: Update abort due to timeout an indeterminable monitoring time during 222. Attempt, new update attempt initiated
Startup information:
- Time for time stamp at the last backed up power on
- Single processor operation
Current/last startup type:
- Delayed connection repeat after time error for H CPUs
Permissibility of certain startup types:
- Manual warm restart permitted
Last valid operation or setting of the automatic startup type at power on:
- Delayed connection repeat after time error for H CPUs
Previous operating mode: STOP (internal)
Requested operating mode: LINK-UP
Event occurred in the standby CPU in rack 1
Incoming event
03:34:34.387 AM 02/03/1995


Event 117 of 120: Event ID 16# 43E0
Change from RUN to link-up mode
Previous operating mode: RUN
Requested operating mode: LINK-UP
Event occurred in the master CPU in rack 0
Incoming event
03:34:34.387 AM 02/03/1995


Event 118 of 120: Event ID 16# 43DE
Update abort due to timeout the max. lock time for priority classes > 15 during 1. Attempt, new update attempt initiated
Previous operating mode: UPDATE
Requested operating mode: STOP (internal)
Event occurred in the standby CPU in rack 1
Incoming event
03:33:04.883 AM 02/03/1995


Event 119 of 120: Event ID 16# 73C2
Update abort due to timeout the max. lock time for priority classes > 15 during 1. attempt
Trigger event: Update abort due to timeout the max. lock time for priority classes > 15 during 1. Attempt, new update attempt initiated
occurred in: Master CPU in rack 0
Requested OB: CPU redundancy error OB (OB72)
Priority class: 28
Incoming event
03:33:04.882 AM 02/03/1995


Event 120 of 120: Event ID 16# 43DE
Update abort due to timeout the max. lock time for priority classes > 15 during 1. Attempt, new update attempt initiated
Previous operating mode: UPDATE
Requested operating mode: RUN
Event occurred in the master CPU in rack 0
Incoming event
03:33:04.882 AM 02/03/1995