求助!通讯问题

已锁定

xiucaiworknet

  • 帖子

    3
  • 精华

    0
  • 被关注

    0

论坛等级:新手

注册时间:2005-10-12

普通 普通 如何晋级?

求助!通讯问题

1422

1

2011-01-13 14:02:09

烧成窑尾PLC主站系统能正常运行但报错误。如图:(CPU图标为错误状态)

查看CPU属性时:状态为 Moudule available and o.k Error LED(EXTF)


进一步查看CPU诊断缓冲时为:如图

Event 119 of 120: Event ID 16# 3942
Module fault present
Module type: Distributed I/O
Input address: 4074
User information available
Diagnostic interrupt from substitute
External module error
Requested OB: Diagnostic interrupt OB (OB82)
Priority class: 25
External error, Incoming event
07:31:48:094 pm 11/12/94

根据故障描述应该为分布式I/O的PA总线接口模块im-157所致,进一步诊断Im-157,如图:

图1

图2

图3

从以上图可以看出是所有的温度变送器所致,地址为 4、6、8……。不知道是什么原因导致所有的温度变送器没办法正确显示图标,从而致使CPU报错误。



另外CPU缓冲里有时也会报这样的故障,如图:


诊断信息如下:


Event 105 of 120: Event ID 16# 38B3
I/O access error when updating the process image input table leaving state
P area, word access, access address: 48
process image partition no.: 0
not user relevant(Z1): 2942
Requested OB: Program execution error OB (OB85)
Priority class: 25
External error, Outgoing event
07:31:54:882 pm 11/12/94


Event 106 of 120: Event ID 16# 38B4
I/O access error when transferring the process image to the output modules leaving state
P area, word access, access address: 24
process image partition no.: 0
not user relevant(Z1): 2943
Requested OB: Program execution error OB (OB85)
Priority class: 25
External error, Outgoing event
07:31:54:882 pm 11/12/94


Event 107 of 120: Event ID 16# 38B4
I/O access error when transferring the process image to the output modules leaving state
P area, word access, access address: 22
process image partition no.: 0
not user relevant(Z1): 2943
Requested OB: Program execution error OB (OB85)
Priority class: 25
External error, Outgoing event
07:31:54:881 pm 11/12/94


Event 108 of 120: Event ID 16# 38B4
I/O access error when transferring the process image to the output modules leaving state
P area, word access, access address: 20
process image partition no.: 0
not user relevant(Z1): 2943
Requested OB: Program execution error OB (OB85)
Priority class: 25
External error, Outgoing event
07:31:54:880 pm 11/12/94


Event 109 of 120: Event ID 16# 38B4
I/O access error when transferring the process image to the output modules leaving state
P area, word access, access address: 18
process image partition no.: 0
not user relevant(Z1): 2943
Requested OB: Program execution error OB (OB85)
Priority class: 25
External error, Outgoing event
07:31:54:880 pm 11/12/94


Event 110 of 120: Event ID 16# 38B4
I/O access error when transferring the process image to the output modules leaving state
P area, word access, access address: 16
process image partition no.: 0
not user relevant(Z1): 2943
Requested OB: Program execution error OB (OB85)
Priority class: 25
External error, Outgoing event
07:31:54:879 pm 11/12/94


Event 111 of 120: Event ID 16# 38C4
Distributed I/Os: station return
Address of the affected DP slave: station number: 11
DP master system ID: 2
Log. base address of the DP slave: Input address: 4076
Log. base address of the DP master: 4095
Requested OB: Rack failure OB (OB86)
Priority class: 25
External error, Outgoing event
07:31:54:825 pm 11/12/94


Event 112 of 120: Event ID 16# 39B3
I/O access error when updating the process image input table entering state
P area, word access, access address: 48
process image partition no.: 0
not user relevant(Z1): 2942
Requested OB: Program execution error OB (OB85)
Priority class: 25
External error, Incoming event
07:31:54:781 pm 11/12/94


Event 113 of 120: Event ID 16# 39B4
I/O access error when transferring the process image to the output modules entering state
P area, word access, access address: 24
process image partition no.: 0
not user relevant(Z1): 2943
Requested OB: Program execution error OB (OB85)
Priority class: 25
External error, Incoming event
07:31:54:781 pm 11/12/94


Event 114 of 120: Event ID 16# 39B4
I/O access error when transferring the process image to the output modules entering state
P area, word access, access address: 22
process image partition no.: 0
not user relevant(Z1): 2943
Requested OB: Program execution error OB (OB85)
Priority class: 25
External error, Incoming event
07:31:54:780 pm 11/12/94


Event 115 of 120: Event ID 16# 39B4
I/O access error when transferring the process image to the output modules entering state
P area, word access, access address: 20
process image partition no.: 0
not user relevant(Z1): 2943
Requested OB: Program execution error OB (OB85)
Priority class: 25
External error, Incoming event
07:31:54:779 pm 11/12/94


Event 116 of 120: Event ID 16# 39B4
I/O access error when transferring the process image to the output modules entering state
P area, word access, access address: 18
process image partition no.: 0
not user relevant(Z1): 2943
Requested OB: Program execution error OB (OB85)
Priority class: 25
External error, Incoming event
07:31:54:779 pm 11/12/94


Event 117 of 120: Event ID 16# 39B4
I/O access error when transferring the process image to the output modules entering state
P area, word access, access address: 16
process image partition no.: 0
not user relevant(Z1): 2943
Requested OB: Program execution error OB (OB85)
Priority class: 25
External error, Incoming event
07:31:54:778 pm 11/12/94


Event 118 of 120: Event ID 16# 39C4
Distributed I/Os: station failure
Address of the affected DP slave: station number: 11
DP master system ID: 2
Log. base address of the DP slave: Input address: 4076
Log. base address of the DP master: 4095
Requested OB: Rack failure OB (OB86)
Priority class: 25
External error, Incoming event
07:31:54:767 pm 11/12/94
求助!通讯问题 已锁定
编辑推荐: 关闭

请填写推广理由:

本版热门话题

SIMATIC S7-300/400

共有54616条技术帖

相关推荐

热门标签

相关帖子推荐

guzhang

恭喜,你发布的帖子

评为精华帖!

快扫描右侧二维码晒一晒吧!

再发帖或跟帖交流2条,就能晋升VIP啦!开启更多专属权限!

  • 分享

  • 只看
    楼主

top
您收到0封站内信:
×
×
信息提示
很抱歉!您所访问的页面不存在,或网址发生了变化,请稍后再试。