1. Make an upload of the Parameter of the CUVC. If this is not possible any more later you
will use the Parameter from the Backup for the download in the CUVC again.
2. Change the CUVC,
2. adjust the baudrate. Set P701 to 8 by the PMU. (8 means a baudrate of 38400). On your
drive monitor must be the same baudrate adjusted.
3. Now you can connect to the CUCV.
4. Now you make the Power definition by setting the P070 to the order number. ( Check the
P070 from the upload or the Backup and adjust the P070 to the same number.)
Notice: before you are able to change the P070 you must set the P060 to 8.
5. Now please compare the P696 with the upload or Backup. If the numbers are not the same
you need to change.
Notice: before you are able to change the P696 you must set the P060 to 4.
6. Download