DB31, ... DBX9.0 / 9.1 / 9.2(controller parameter set selection)
The PLC user program sends a binary code request via the "controller parameter set
selection" to activate the corresponding parameter set with that of the NC.
DBX9.2 DBX9.1 DBX9.0 Parameter-set number
0 0 0 1
0 0 1 2
0 1 0 3
0 1 1 4
1 0 0 5
1 0 1 6
1 1 0 6
1 1 1 6
Parameter-set changeover must be enabled via the machine data (not required for spindles):
MD35590 $MA_PARAMSET_CHANGE_ENABLE = 1 or 2